Now showing items 1-4 of 4

    • Design and development of PC-Base control of a Tele-operated Robot 

      Herianto; Zahari, Taha; Daisuke, Kurabayashi; Suga, Yasuo (Kolej Universiti Kejuruteraan Utara Malaysia, 2005-05-14)
      This paper describes the communication and control infrastructure of a tele-operated robot prototype at the ROBOTIC LAB, University of Malaya. The robot is controlled from a computer via Radio Frequency (RF) wireless. The ...
    • RF behavior of undoped channel ultra-thin body with ultra-thin BOX MOSFETs 

      Mohd Khairuddin, Md Arshad, Dr.; Mostafa, Emam; Kilchytska, Valeria I., Dr.; Andrieu, François, Dr.; Flandre, Denis, Prof.; Raskin, Jean-Pierre P., Prof. (Institute of Electrical and Electronics Engineers (IEEE), 2012-01)
      RF performance of ultra-thin body with ultra-thin buried oxide (BOX), so-called UTBB, MOSFETs with gate length down to 30 nm is presented. Current gain cut-off frequency f T and maximum oscillation frequency f max of 160 ...
    • Waste of radio frequency signal analysis for wireless energy harvester 

      Mohd Aminurrahim, Othman (Institute of Electrical and Electronics Engineers (IEEE), 2010-05-21)
      Process by which energy is derived from external sources like thermal energy, wind energy and kinetic energy, captured and stored are called 'Energy Harvesting' or 'Energy Scavenging'.[1] Normally this method is applied ...
    • Wireless Camera Controller System for Mobile Robot using RF 

      M. Zaki, A. Bakar; M. Shahrieel, M. Aras; M. Hafiz, Sulaiman (Universiti Malaysia Pahang, 2009-06-20)
      This project is purposely to design the Wireless Camera Controller for Mobile Robot using Radio Frequency. To control position of the camera, forward and reverse motor circuit is most suitable to use. This circuit will ...