Browsing School of Environmental Engineering (FYP) by Subject "Aggregate"

Now showing items 1-9 of 9

    • The behaviour of construction waste as coarse aggregates 

      Norhayati, Hasim (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This research is one of the positive methods by recycling construction waste material as the replacement to coarse aggregate in concrete mixture. The purpose of this study is to determine the performance of crushed ...

    • The development of lightweight concrete using modified expanded polystyrene beads 

      Nur Zati Zulaikha, Zaaba (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Lightweight concrete defined that is a type of concrete that is use lightweight aggregates and more lighter with low density than the conventional concrete. The main objectives of this research were to produce a good quality ...

    • Glass dust waste as fine aggregate replacement material in concrete 

      Rohana, Hashim (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Glass dust waste creates chronic environmental problems, mainly due to the inconsistency of waste glass streams. Recycling is the best solution for the crisis resulting from huge volumes of wastes and includes economic ...

    • Production of lightweight aggregate from fly ash and clay 

      Mohamad Hafiz, Hanapi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      The main objective of this study is to determine whether fly ash and clay can be used to produce lightweight aggregate, study the durability of lightweight aggregate from fly ash and clay and to make comparison between ...

    • Production of lightweight concrete from waste clay brick 

      Ainur Syahirah, Abdul Rahman (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Nowadays, concrete is known as a common material which is widely used in the world. This study has been carried out to identify alternative materials that can be used to replace aggregate in lightweight concrete production. ...

    • Production of thermal insulation building materials to reduce effect on indoor thermal environment 

      Sharifah Nora, Syed Shuhaimi (Universiti Malaysia Perlis (UniMAP), 2015-06)

    • Properties of concrete made from lightweight aggregate under different curing time 

      Leong, Qi Wen (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Nowadays, construction either in building and infrastructure is mushrooming until cause high demand of consumption raw materials and this was led high competitive and shortage of natural resources in some part of the world. ...

    • Study on interlocking concrete block Pavement (ICBP) made with fly ash 

      Wan Rusmawi, Wan Mohamed (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Malaysia is producing over 2 million tons of fly ash annually, which is expected to double by 2013 as demand for energy is growing very rapidly. The ash produced by burning coal is considered to be a waste product and the ...

    • Use of demolition waste to reduce cement usage in cement composite 

      Mohd Khairi, Abdul Aziz (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-04)
      As a developing country, construction is one of the main incomes producing in Malaysia. Huge amount of demolition waste were produced from these activities. In Malaysia, the construction waste has cause a significant impact ...