Search
Now showing items 1-10 of 11
Sulfuric acid attack on ordinary Portland cement and geopolymer material
(Institute for Scientific Information (ISI), 2013-09)
The resistance of ordinary Portland cement binder towards acid had been widely discussed by researchers. The deterioration effect of this binder may cost high repair expense and rehabilitation. Geopolymer material is a new ...
Effect of alkali concentration on mechanical properties of kaolin geopolymers
(Foundation for Materials Science and Engineering, 2012)
Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...
Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets
(Trans Tech Publications, 2013)
Studies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and ...
Mechanical properties of polymer composites with sugarcane bagasse filler
(Trans Tech Publications, 2013)
Natural fibers reinforced polymer composites have gained more interest because of their biodegradable, light weight, less expensive sources, easy processing, high specific modulus and also environmentally friendly appeal. ...
Effect of alkali concentration on mechanical properties of kaolin geopolymers
(Procema SA, 2012)
Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...
Comparison of processing and mechanical properties of polypropylene/recycled acrylonitrile butadiene rubber/rice husk powder composites modified with silane and acetic anhydride compound
(SAGE Publications Ltd, 2014-12)
Polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr)/rice husk powder (RHP) composites were fabricated with silane and acetic anhydride (Ac) treatment agent. The in situ formed RHP-filled PP/NBRr composites ...
Mechanical, morphological and thermal properties of chitosan filled polypropylene composites: The effect of binary modifying agents
(Elsevier B.V., 2013)
This work investigates the effects of the binary modifying agents-organosolv lignin and acrylic acid, on the mechanical and thermal properties of chitosan-filled polypropylene (PP) composites. We analyse the mechanical and ...
Wettability, electrical and mechanical properties of 99.3Sn-0.7Cu/Si 3N4 novel lead-free nanocomposite solder
(Trans Tech Publications, 2011-07-04)
A nanocomposite solder alloy with 99.3Sn-0.7Cu base alloy was successfully fabricated using the powder metallurgy route which consists of blending, compaction and sintering. Varying amount of nano size silicon nitride ...
The effect of compatibilizer on tensile properties, swelling behaviour and morphology of Calcium Carbonate filled Polypropylene/Ethylene Propylene Diene Terpolymer composites
(Universiti Kuala Lumpur (UniKL), 2007-11-27)
Calcium carbonate (CaCO3) was used as filler in the polypropylene (PP)/ ethylene propylene diene terpolymer (EPDM) composites in order to decrease cost and change the properties. The composites were prepared by using a ...
Mechanical and Morphology Properties of Egg-Shell Powder (ESP) Filled Low Density Polyethylene Composites
(Universiti Kuala Lumpur (UniKL), 2007-11-27)
Mechanical and morphology properties of low density polyethylene/egg shell powder composites were examined. Composites were prepared in Z-Blade Mixer. Mixing was done at 1600C and rotor speed of 50 rpm. Sample of composite ...