Search
Now showing items 111-120 of 165
Wettability analysis on platinum deposited wafer after reactive ion ecthing using SF6+argon/CF4+argon gaseous
(AENSI Publisher All rights reserved, 2013-10)
Wettability in microfluidic has direct influence to its fluid flow channels. This paper investigates the variable parameters that affect the wetability in terms of contact angle on a Platinum deposited wafer after reactive ...
Calcined kaolin geopolymeric powder: Influence of water- to geopolymeric powder ratio
(Trans Tech Publications, 2012-07)
This paper describes the synthesis of calcined kaolin geopolymeric powder from the alkaline activation of calcined kaolin followed by solidification and pulverizing process. The geopolymeric powder was used by just adding ...
Processing and characterization of calcined kaolin cement powder
(Elsevier Ltd, 2012-05)
Abstract
This paper aimed at investigating the possibility of calcined kaolin to produce cement powder that could be an alternative to Portland cement by applying geopolymerization process. Cement paste was firstly made ...
Investigation of dielectric characteristics and tunability of Ba0.8Sr0.2TiO3
(AENSI Publisher All rights reserved, 2013-10)
It's been years ferroelectric materials has become a popular fields for research. Many methods were used for the barium strontium titanate (BST) preparation like sol-gel method, radio frequency (RF) magnetron sputtering, ...
Influence of solidification process on calcined kaolin geopolymeric powder
(Trans Tech Publications, 2012-02)
This paper aims at investigating the influence of solidification condition on the processing of calcined kaolin geopolymeric powder. This is a new process developed using the geopolymerization process. Geopolymer slurry ...
Effects of dynamic vulcanization on thermal properties of calcium carbonate filled polypropylene/ethylene propylene diene terpolymer composites
(Universiti Putra Malaysia Press, 2010-07)
In this study, dynamic vulcanization process was used to improve the thermal properties of calcium carbonate filled composites. The composites were prepared using a Z-blade mixer at 180°C and rotor speed 50rpm. Thermogravimetric ...
Wettability, electrical and mechanical properties of 99.3Sn-0.7Cu/Si 3N4 novel lead-free nanocomposite solder
(Trans Tech Publications, 2011-07-04)
A nanocomposite solder alloy with 99.3Sn-0.7Cu base alloy was successfully fabricated using the powder metallurgy route which consists of blending, compaction and sintering. Varying amount of nano size silicon nitride ...
The effect of silane treatment on processing characteristic and swelling behavior of polypropylene/recycled acrylonitrile butadiene rubber/rice husk powder composites
(Trans Tech Publications, 2011-03-22)
The effect of silane treatment on processing characteristic and swelling behavior of recycled acrylonitrile butadiene rubber (NBRr)/polypropylene (PP)/rice husk powder (RHP) composites has been studied. Polypropylene/recycled ...
Investigate the liberation of copper from waste Printed Circuit Boards (PCBs)
(Universiti Malaysia Perlis, 2010-06-09)
Nowadays the waste PCBs
increasing sharply proportionally the
number of personal computers which is 5.7
million in 2005 and the predict amounts, it
will be increase to 11.5 Million in 2010
(Unit Perancangan Ekonomi, ...
Novel of Binary Metal-Non Metal Material for Chair Flower Product (Novel AI - PP for Chair Flower Product)
(Universiti Malaysia Perlis, 2009)
Material for aluminium product usually made from aliminium scrap. Nowadays, the price of aluminium scrap is increased. The idea is how to minimize the cost of production via minimize the weight of the product without ...