Browsing Kamarudin Hussin, Brig. Jen. Datuk Prof. Dr. by Subject "Microstructure"
Now showing items 1-9 of 9
-
Comparative characterization of Clinker’s microstructure at different temperature zone during cement production
(Science Publications, 2007)Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ... -
Comparative Characterization of Clinker’s Microstructure at Different Temperature Zone during Cement Production
(Science Publications, 2007)Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ... -
A comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methods
(Syscom 18 SRL, 2013-07)The properties of Sn-0.7Cu solder bulk prepared via the powder metallurgy (PM) method were investigated and compared with solder bulk fabricated through casting. Distinct microstructures were observed in both PM and casting ... -
Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder
(Scientific.Net/Trans Tech Publications, 2012-12)The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ... -
General properties of kaolin geopolymers
(American Scientific Publishers, 2013-01)This paper reported the properties of kaolin geopolymers in term of the bulk density, compressive strength, qualitative observation and SEM analysis of the kaolin geopolymers. Kaolin geopolymers were synthesized through ... -
Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite
(Trans Tech Publications (TTP), 2013)A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ... -
Microstructure study on optimization of high strength fly ash based geopolymer
(Trans Tech Publications, 2012)The compressive strength and microstructural characteristics of fly ash based geopolymer with alkaline activator solution were investigated. The sodium hydroxide and sodium silicate were mixed together to form an alkaline ... -
Properties of metakaolin geopolymeric binder
(American Scientific Publishers, 2013-01)This paper investigates the physical and mechanical properties as well as the morphology study of the MK geopolymeric binder. Mixture of waterglass liquid and NaOH solution were used as the activator solution for the ... -
A study of clinker microstructure using scanning electron microscope
(Malaysian Institute for Nuclear Technology Research (MINT), 2006-11-29)This paper presents a study of clinker microstructure using Scanning Electron Microscope with Energy Dispersive Spectrometer (SEM-EDS). Use of SEM-EDS allows measuring bulk phase abundance and surface areas of the phases, ...