Search
Now showing items 71-80 of 87
An investigation of TiO2 addition on microstructure evolution of Sn-Cu-Ni solder paste composite
(EDP Sciences, 2016)
In this research, varying fraction of titanium oxide (TiO2) reinforcement particles was successfully incorporated into Sn-Cu-Ni solder paste in an effort to study the influence of TiO2 addition on microstructure evolution ...
Fe-doped 8YSZ at different composition for solid electrolyte in solid oxide fuel cell
(EDP Sciences, 2016)
Pure 8 mol% yttria stabilized zirconia (YSZ) and Fe-doped (1 mol%, 2 mol% and 3 mol%) YSZ electrolyte were prepared and sintered at 1550°C. Transition metal oxide is added into YSZ as sintering aided has a function to ...
Review of Dolomite as precursor of Geopolymer materials
(EDP Sciences, 2016)
Geopolymer is an environmentally friendly cementitious binder that does not require the existence of ordinary Portland cement (OPC). Geopolymer has many excellent advantages, including high early strength, low shrinkage, ...
Thermal properties of ethyl vinyl acetate (EVA)/ montmorillonite (MMT) nanocomposites for biomedical applications
(EDP Sciences, 2016)
The viability of nanocomposites comprising Ethyl Vinyl Acetate (EVA) filled montmorillonite (MMT) nanoclay as candidate materials of biomedical devices was investigated. EVA/MMT nanocomposites were prepared by incorporating ...
Influence of Activated Carbon Particles on Intermetallic Compound Growth Mechanism in Sn-Cu-Ni Composite Solder
(EDP Sciences, 2016-10)
The influence of Activated Carbon (AC) particles on mechanical properties of Sn-Cu-Ni-xAC solder joint was investigated. Five different Activated Carbon (AC) percentage addition (0 wt. %, 0.25 wt. %, 0.5 wt. %, 0.75 wt. ...
Illumination and contrast correction strategy using bilateral filtering and binarization comparison
(Universiti Teknikal Malaysia Melaka, 2016)
Illumination normalization and contrast variation on images areone of themost challenging tasks in the imageprocessing field. Normally, the degrade contrast imagesarecaused by pose, occlusion, illumination,and ...
A Simple Method for the Production of Pure Crystalline Silica from Lemon Grass
(North Carolina State University, 2016)
Lemon grass is an inexpensive raw material that can be used to produce natural silica. A method using hydrochloric acid (HCl) leaching followed by thermal combustion at 600 °C was developed to produce purified silica from ...
Behavior of CuPb12Sn6 Alloys subjected to Heat Treatments
(EDP Sciences, 2016-10)
The paper present the structural modifications induced by 3 heat treatments: homogenization, recrystallization and quenching, respecting the specific parameters of copper based alloys. The obtained modifications by heat ...
Study on Characteristics of Lightweight Aggregate Concrete Made From Foam and Ordinary Portland Cement
(EDP Sciences, 2016)
The production and characteristic of lightweight bubble aggregates (LBA) are presented in this paper. The LBA are produced by
mixing between the foam and ordinary Portland cement according to the composition which has ...
The Impacts of Platinum Diffusion to the Reverse Recovery Lifetime of a High Power Diode Devices
(EDP Sciences, 2016)
The reverse recovery lifetime of a diode is one the key parameter in power electronics market. To make a diode with fast switching speed, diodes are often doped with impurities such as gold and platinum to improve its ...