Search
Now showing items 11-20 of 91
Strength and microstructural properties of mechanically-activated kaolin geopolymers
(Trans Tech Publications, 2012-12)
Kaolin geopolymers exhibit low strength properties due to its plate-like nature which contribute to smaller surface area for geopolymerization reactions. Layered kaolin structure only allows very little, if any, substitution ...
Potential application of palm ash as a raw materials in production of green glass
(Scientific.Net/Trans Tech Publications, 2012-12)
Oil Palm Ash is one of the abundance agricultural wastes found in Malaysia. This wastes need to be disposed properly. Oil palm ash contains compounds needed to produce glass. Most of raw materials (especially silica) used ...
Mechanical performances of fly ash geopolymer bricks
(American Scientific Publishers, 2013-01)
Geopolymer is a new class of three-dimensionally networked amorphous to semi-crystalline alumino-silicate materials, and first developed by Professor Davidovits in 1978. Geopolymers can be synthesized by mixing alumino-silicate ...
Research development of solder materials and its intermetallic compound (IMC) study
(Scientific.Net/Trans Tech Publications, 2012-12)
Nowadays, the formation and the subsequent growth of the intermetallic compounds (IMCs) and the development of new lead-free solder systems is a major issue in soldering. The excessive growth formation of intermetallic ...
Research advances of composite solder material fabricated via powder metallurgy route
(Scientific.Net/Trans Tech Publications, 2012-12)
Researches and studies on composite solder have been done by many researchers in an effort to develop viable lead-free solders which can replace the conventional lead-based solders as lead is considered as toxic. Solder ...
The effect of curing time on the properties of fly ash-based geopolymer bricks
(Scientific.Net/Trans Tech Publications, 2012-12)
This paper reports the results of an experimental work conducted to investigate the effect of curing conditions on the properties of fly ash-based geopolymer bricks prepared by using fly ash as base material and combination ...
Lightweight fly ash-based geopolymer concrete
(Trans Tech Publications, 2013)
The experiments of this study were preformed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) using normal sand as a fine aggregate and expanded clay as lightweight aggregate. The LWAGC ...
Application of clay - based geopolymer in brick production: a review
(Trans Tech Publications/Scientific.Net, 2012-12)
This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...
Optimization of alkaline activator / fly ash ratio on the compressive strength of manufacturing fly ash-based geopolymer
(Trans Tech Publications, 2012)
Fly ash and a mixture of alkaline activators namely sodium silicate (Waterglass) and sodium hydroxide (NaOH) solution were used for preparing geopolymer. The aim of this research is to determine the optimum value of the ...
Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength
(Trans Tech Publications, 2013)
Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ...