Search
Now showing items 1-10 of 18
Review of study to improve dye sensitized solar cells performance by TiO2 thickness and extract mangosteen pericarp as sensitized
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)
Based on the process and observation of this paper electrical energy conversion efficiency in dye sensitized solar cell performance is strongly influenced by the dye and the thickness Titaniuam dioxide. Both of these items ...
Relationship between the solar radiation and surface temperature in Perlis
(Trans Tech Publications, Switzerland., 2012-06)
Statistical models for predicting the solar radiation have been developed. In any prediction of the solar radiation, an understanding of its characteristics is of fundamental importance. This study presents an investigation ...
Performace of wind turbine based on wind speed data and turbine tower height in Kangar, Northern Malaysia
(Australian Journal of Basic and Applied Sciences, 2011-07)
This paper presents an analysis of the wind speed characteristic in Kangar, Northern Malaysia. The Weibull distribution function is applied to analyze the wind speed characteristic and used to calculate the wind power ...
The impacts of stator outside diameters on induction motor nameplates: Analysis by using a finite element
(Institute of Electrical and Electronics Engineers (IEEE), 2010-12-13)
Design stimulation by software is important in order to save money and time. This paper is using stimulation software, which is a finite element method, to analyze the stator outside diameter impact on rated current, horse ...
The impacts of stator materials on induction motor nameplate parameters for high performance
(Institute of Electrical and Electronics Engineers (IEEE), 2010-12-13)
Core materials and magnet wire sizes were analyzed in order to find out the impacts on nameplate for high performance motor. Stack length and back core iron depth of stator geometry design are the parameters involve in ...
Fabrication and investigation of copper rotor bar on 0.5HP induction Motor-A performance and economical study
(Australian Journal of Basic and Applied Sciences, 2011-05)
The paper deals with the fabrication of copper rotor bars for 0.5HP induction motor and then comparing it with the existing aluminium rotor bars. From this experiment the rotors are compared in terms of efficiency increment ...
In house construction of an induction motor rotor by using 0.35mm thickness of steel sheet for efficiency based investigation
(Trans Tech Publications, 2012)
In this paper, an in house production of a 0.5hp induction motor's rotor is investigated. This investigation considers the induction motor's efficiency and losses dissipation as an important aspect to determine the rotors ...
Predicting the localized flux distribution in three phase induction motor between different stator slot size
(Institute of Electrical and Electronics Engineers (IEEE), 2011-06-06)
A three phase induction motor differences of stator slot size is investigated in terms of its localized flux distribution. The search coil induced voltage method is used to analyze the flux distribution in the stator core. ...
Clear sky global solar irradiance on tilt angles of photovoltaic module in Perlis, Northern Malaysia
(Institute of Electrical and Electronics Engineers (IEEE), 2011-06-21)
The performance of a photovoltaic (PV) is highly influenced by its orientation and its tilt angle with the horizontal, due to the fact that both the orientation and tilt angle change the amount of solar radiation reaching ...
Combination of Hargreaves method and linear regression as a new method to estimate solar radiation in Perlis, Northern Malaysia
(Elsevier Ltd., 2011-11)
The best way to obtain the solar radiation data of a particular place of interest (POI) is to measure at the specific site continuously and accurately over the long term. However, due to financial, maintenance, calibration ...