Search
Now showing items 1-9 of 9
Mechanical performances of fly ash geopolymer bricks
(American Scientific Publishers, 2013-01)
Geopolymer is a new class of three-dimensionally networked amorphous to semi-crystalline alumino-silicate materials, and first developed by Professor Davidovits in 1978. Geopolymers can be synthesized by mixing alumino-silicate ...
Lightweight fly ash-based geopolymer concrete
(Trans Tech Publications, 2013)
The experiments of this study were preformed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) using normal sand as a fine aggregate and expanded clay as lightweight aggregate. The LWAGC ...
Optimization of alkaline activator / fly ash ratio on the compressive strength of manufacturing fly ash-based geopolymer
(Trans Tech Publications, 2012)
Fly ash and a mixture of alkaline activators namely sodium silicate (Waterglass) and sodium hydroxide (NaOH) solution were used for preparing geopolymer. The aim of this research is to determine the optimum value of the ...
Compressive strength of fly ash based geopolymer / glass fiber composite via filament winding
(Trans Tech Publications, 2014)
In general, filament winding technique is used to fabricate the composite pipes using continuous fiber and matrix resin. In this study, fly ash based geopolymer resin composites reinforced by continuous glass fiber were ...
Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature
(Trans Tech Publications, 2014)
This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...
Microstructure study on optimization of high strength fly ash based geopolymer
(Trans Tech Publications, 2012)
The compressive strength and microstructural characteristics of fly ash based geopolymer with alkaline activator solution were investigated. The sodium hydroxide and sodium silicate were mixed together to form an alkaline ...
Comparison of geopolymer fly ash and ordinary Portland cement to the strength of concrete
(American Scientific Publishers, 2013-12)
The aim of this study is to evaluate the effect of various fly ash: aggregate ratios by using fly ash (FA) based geopolymer compared to ordinary Portland cement (OPC) on the compressive strength of concrete. The different ...
Correlation between Na 2SiO 3/NaOH ratio and fly ash/alkaline activator ratio to the strength of geopolymer
(Trans Tech Publications, 2012)
Geopolymer requires an alkaline activator to induce it pozzolanic property and to accelerate the geopolymerisation process. The geopolymerisation process occurs due to the mixing of fly ash, sodium silicate and sodium ...
Review on the various ash from palm oil waste as geopolymer material
(Advanced Study Center Co. Ltd., 2013)
The solid waste from palm oil mill industry has been increasing annually where it has been reported that the palm oil waste was produced 4 million tons/years in Malaysia only. Hence, the solution to overcome the problems ...