Search
Now showing items 1-6 of 6
The effect of sintering on the properties of powder metallurgy (PM) F-75 alloy
(Trans Tech Publications, 2013)
F-75 (Co-Cr-Mo) alloy are widely used in the production of medical implants because of their excellent strength properties, hardness and also one of the biocompatible materials that very suitable in human body environment. ...
Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite
(Trans Tech Publications (TTP), 2013)
A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ...
Fabrication and characterization of porous F-75 for potential application in tissue engineering
(Trans Tech Publications, 2013)
Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...
The outcome of sintering parameters study toward the thermal properties of CuSiC composite
(Trans Tech Publications, 2014)
Miniaturisation of electronic chips which have increasing functionality within the same package size has induced significant increases in requirements for extraction of heat from the integrated circuit (IC). Packaging ...
Effect of space holder and compaction pressure on the porosity of sintered copper
(Trans Tech Publications, 2013)
The effect of space-holder content on the porosity of sintered copper that was fabricated by powder metallurgy technique has been investigated. Carbamide was used as space-holder and the content selected was 10 wt. %, 20 ...
Synthesis and characterization of pure magnesium/bio-glass composite
(Trans Tech Publications, 2013)
In this study, bio-glass 45S5 powder was added to pure magnesium powder to produce the magnesium/bio-glass composite by powder metallurgy method. The composite was synthesized based on 5 wt. %, 10 wt. % and 15 wt. % of ...