Browsing Journal Articles by Subject "Steel, Stainless"
Now showing items 1-11 of 11
-
Austenitic stainless steel by powder metallurgy-promises and problems
(Powder Metallurgy Association of India (PMAI)Aligarh Muslim University, Aligarh, 1984)Production techniques and properties of austenitic stainless steel powders have been described in brief. Influence of oxygen accretion during sintering, factors affecting compressibility and influence of annealing powders ... -
Effect of Inhibitors on the Corrosion of AISI-1018 Steel in Sea-Water Environment
(Research India Publications, 2008)The inhibitive properties of sodium benzoate for AISI-1018 steel controlling corrosion were studied in seawater environment at atmospheric condition. Three sets of solution were prepared with the concentrations of 0.3M, ... -
Ferrous base materials performance in seawater and its failure analysis
(Kolej Universiti Sains dan Teknologi MalaysiaFakulti Sains dan Teknologi, 2004)The effect of seawater to the corrosion behavior of ferrous base steel AISI 1053 have been determined at room temperature. The corrosion products were characterized by using energy-dispersed X-ray spectroscopy (EDS), and ... -
High temperature corrosion behaviour of steel with a Carbonate deposit at 1123K
(School of Materials Engineering, 2007)The high temperature corrosion behavior of A1S1 304 austenitic stainless steel and S45C carbon steel were studied in presence with CaCO3 salt at 1123K for 24,48,72, 96 and 120 hour. The studies were carried out to determine ... -
Hot corrosion behaviour of 18Cr-8Ni Austenitic Steel in presence of Na2S04 and transition metal salts
(The Japan Institute of MetalsChemistry Section, Z. H. College of Engineering and Technology, Aligarh Muslim University, 1984)The high temperature oxidation behaviour of 18Cr-8Ni austenitic steel has been studied in presence of Na2S04 and transition metal salts, e.g. NiS04, CoS04, Cr2(S04)3, (NH4)2Mo04, NaV03 or Na2W04 in the temperature range ... -
Hot corrosion behaviour of Austenitic Steel-308 in Chloride salts
(School of Materials Engineering, 2008)The intensification of process engineering in almost every branch of modern technology, and development of new technologies make increasingly higher requirements for metallic construction materials, especially for their ... -
Hot corrosion of austenitic steel in Molten alkali sulphate deposits at 850°C
(Carl Hanser VerlagFaculty of Science, University of Maiduguri, Nigeria., 1996) -
Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique
(Science Publications, 2008)The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ... -
Oxidation behavior of AISI 304 steel in presence of Na2 SO4 and K2 SO4 at 900°C
(Carl Hanser VerlagFaculty of Science, University of Maiduguri, Nigeria, 1993)Steels with high Cr- and Ni-contents utilized at elevated temperatures are oxidation resistant due to the formation of slowly growing, protective chromium oxide layers [1,2]. Na2SO4 or K2SO4 alone or in synergistic combination ... -
Oxidation behaviour of 18/8 Cr-Ni austenitic steel in presence of Na2SO4 and NiSO4 at 650 to 1000°C
(Carl Hanser Verlag, Germany, 1983)Iron based alloys containing chromium as a major constituent with nickel additions are the most prominent materials in coal fired generating units and petroleum refinery plants. The corrosion of these alloys under service ... -
Oxidation behaviour of AISI-316 steel in molten ionic salts at 650-1000-C
(Journal of Ultra Scientist of PhysicalFaculty of Science and Professional Arts, Universiti Putra Malaysia Terengganu, 2000)Sodium sulphate (Na2S04) sodium meta-vanadate (NaV03) and its binary combination on the hot corrosion behaviour of AISI-316 steel in the temperature range 650-1000°C have been studied in flowing air The influence of ...