Browsing Journal Articles by Author "Shamsul Baharin, Jamaludin"
Now showing items 1-13 of 13
-
Aluminium - Polymer abs product
Mohd Ichwan, Nasution; Kamaruddin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Khairel Rafezi, Ahmad; Faizul, Che Pa; Chek Idrus, Omar (Universiti Malaysia Perlis (UniMAP), 2012)Material used for aluminium product usually made of aluminium scrap. Currently, the price of aluminium scrap is increase. It is necessary to minimize the cost of production by reducing the weight of the aluminium product ... -
Comparative characterization of Clinker’s microstructure at different temperature zone during cement production
Mohd Sobri, Idris; Khairul Nizar, Ismail; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (Science Publications, 2007)Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ... -
Comparative Characterization of Clinker’s Microstructure at Different Temperature Zone during Cement Production
Mohd Sobri, Idris; Khairul Nizar, Ismail; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (Science Publications, 2007)Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ... -
Comparative Study of Clinker’s Transformation at Different Temperature Zone During Cement Production
Mohd Sobri, Idris; Khairul Nizar, Ismail; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (Science Publications, 2007)Chemical composition analysis using x-ray fluorescence is one of the important quality analysis for examining of cement and widely used in cement industries for a long time as a tool to estimate phase composition. X-ray ... -
Comparative study of corrosion behavior of AA2014/15 Vol%Al2O3p and AA2009/20 Vol% SiCw
Shamsul Baharin, Jamaludin; Z. Yusoff; Khairel Rafezi, Ahmad (Portuguese Electrochemical Society, 2008)The influence of heat treatment on the corrosion behavior of two aluminium matrix composites (AA2014/15 vol% Al2O3p - composite A and AA2009/20 vol% SiCw - composite B) was analyzed in 3.5% sodium chloride solution. The ... -
Comparison of dynamic mechanical properties of non-superheated and superheated A357 alloys
Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Slovak Academy of Sciences, 2010-03-01)The influence of superheat treatment on the microstructure and dynamic mechanical properties of A357 alloys has been investigated. The study of microstructure was performed by optical microscope. Dynamic mechanical ... -
The effect of heat treatment on the open circuit potential of magnesium sacrificial anode
A. M. H., Firdaus; Shaiful Rizam, Shamsudin; Shamsul Baharin, Jamaludin; M. N., Derman; Mohd Fitri, Mohd Wahid; M. Z., Ruhiyudin (University of Malaya, 2009)Magnesium sacrificial anode that possess high value of open circuit potential, Eoc is needed as it can protect larger area of underground metal structure in cathodic protection. Solution treatment was applied on magnesium ... -
Effects of magnesium sulfate attack on ordinary portland cement (OPC) mortars
Mohammed Misbahul, Amin; Shamsul Baharin, Jamaludin; Faizul, Che Pa; K.K. Chuen (Portuguese Electrochemical Society, 2008)The chemical and mineralogical compositions in Ordinary Portland Cement (OPC) were determined and cement which is low of C3A is more easily exposed to sulfate environment. The relation between physical strength of mortars ... -
The fabrication of artificial marble from dolomite (Batu Reput)
Kamarudin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Mohd Sobri, Idris; Mohd Nazry, Salleh; Mohabattul Zaman, S NS Bukhari; Khairul Nizar, Ismail (The Mineral, Metals & Materials Society (TMS), 2006-01)Perlis is one of the major producers of "Batu Reput" in Malaysia and majority of the deposits contain of high-purity calcium and magnesium carbonate. The composition of Batu Reput is similar with the ordinary dolomite. ... -
The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
Shamsul Baharin, Jamaludin; Ahmad Latiffi, A. A. T.; Khairel Rafezi, Ahmad; Fazlul, Bari (Universiti Malaya, 2009)In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ... -
Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique
Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Science Publications, 2008)The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ... -
Studies on mechanical alloying of Copper-Tungsten Carbide composite for spot welding electrode
Zuhailawati, H; Shamsul Baharin, Jamaludin (Springer New York, 2009-02-27)This article presents a study on the properties and performance of copper-based composite reinforced with recycled tungsten carbide powder as spot welding electrode. The copper-tungsten carbide composite electrode was ... -
Synthesis of sol-gel silica chemically bonded with cyanex 272 for the removal of Cu(II), Ni(II), and Zn(II)
Md Fazlul, Bari; Noorzahan, Begum; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Springer Netherlands, 2009-05)This article reported on the synthesis of SSCBB, a new solid-phase, sol-gel silica chemically bonded with [bis (2,4,4-trimethylpentyl) phosphinate], (BTMPP, anion of Cyanex 272) prepared with a sol-gel method, and its ...