Browsing Journal Articles by Title

Now showing items 2320-2339 of 3156

    • Polysilicon nanowire fabrication as a transducer for fast reaction assays in nano lab-on-chip domain 

      Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Dhahi, Th Sabar; Foo, Kai Loong; Leow, Pei Ling; Chee, Pei Song (American Scientific Publishers, 2013-02)
      The difficulty with the treatment of cancer is caused by lack of ability to detect the tumor associated with the disease at the early stage. Often, cancer is detected in its later stages, when it has compromised the function ...

    • Porous glass composite as diesel particulate filter and the microwave regeneration 

      Chang Chuan, Lee; Noboru, Yoshikawa; Shoji, Taniguchi (Trans Tech Publications Inc., 2014-06)
      In this study, porous SiO2·RO/stainless steel composite body was prepared through the polyurethane sponge replica method. Porous samples obtained through sintering consist of well dispersed and distributed stainless steel ...

    • Postural Control and Functional Performance After Core Training In Young Soccer Players 

      Ahmet Kaan Aslan; Nurtekin, Erkmen; Samet, Aktaş; Faruk, Güven (Kementerian Pendidikan Tinggi (KPT), Malaysia, 2018)
      This study aimed to determine the effects of an 8-week core training on the balance and functional performance of young soccer players. Thirty young soccer players (age: 16.23 ± 0.69 years) were included in the study. ...

    • Postural sway and shooting accuracy of skilled recurve archers 

      Muhamad Noor, Mohamed; Azrul Hisham, Azhar (Kementerian Pendidikan Tinggi (KPT), MalaysiaInnovative Manufacturing, Mechatronics & Sports Lab (iMAMS), Universiti Malaysia Pahang, 2012)
      Archery can be defined as a non-contact, static sport that requires its archers to possess muscular strength, upper body endurance and high levels of stability. These performance variables are required specifically at the ...

    • Potential application of kaolin without calcine as greener concrete: A review 

      Cheng, Yong Heah; Hazlinda, Kamarudin; Mohd Mustafa Al-Bakri, Abdullah; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr; Liew, Y. M. (INSInet Publications, 2011-07)
      Kaolin is a white raw material that has an essential constituent which makes it ideal for industrial applications such as green concrete. Based on a historical review, it appears that green polymeric composites created by ...

    • Potential application of palm ash as a raw materials in production of green glass 

      Noorina Hidayu, Jamil; Mohd Mustafa Al Bakri, Abdullah; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki; Murizam, Darus; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohamed Faisol, Mohamed Nor (Scientific.Net/Trans Tech Publications, 2012-12)
      Oil Palm Ash is one of the abundance agricultural wastes found in Malaysia. This wastes need to be disposed properly. Oil palm ash contains compounds needed to produce glass. Most of raw materials (especially silica) used ...

    • Potential halophilic cellulases for in situ enzymatic saccharification of ionic liquids pretreated lignocelluloses 

      Ahmad Anas, Nagoor Gunny; Arbain, Dachyar; Rizo, Edwin Gumba; Jong, Bor Chyan; Parveen, Jamal (Elsevier, 2014-03)
      Ionic liquids (ILs) have been used as an alternative green solvent for lignocelluloses pretreatment. However, being a salt, ILs exhibit an inhibitory effect on cellulases activity, thus making the subsequent saccharification ...

    • Potential innovations in separation technology by nature-inspired membranes: Beneath and beyond the Earth's crust 

      Nora, Jullok (Society of Chemical Industry/Wiley, 2014-04)
      The understanding of complex bio-mechanisms in nature is explored in this perspective as a way to effectively enable scientific advancements in membrane technology. The mechanisms of nature-inspired technological improvements ...

    • Potential of conformal cooling channels in rapid heat cycle molding: a review 

      Shayfull Zamree, Abd Rahim; Safian, Sharif; Azlan, Mohd Zain; Rozaimi, Mohd Saad; Mohd Fathullah, Ghazli@ Ghazali (Wiley Periodicals, Inc., 2014)
      Rapid heat cycle molding (RHCM) can eliminate the weld line, increase flow length, and improve surface quality of the molded parts. However, the cycle time is much longer as compared to the conventional injection-molding ...

    • Potential Of Electron Beam Irradiated HDPE/EPR Blend As Shoes Sole 

      Husniyah Aliyah, Lutpi; Hazleen, Anuar (Kementerian Pendidikan Tinggi (KPT), MalaysiaDepartment of Manufacturing and Materials Engineering, Faculty of Engineering, International Islamic University Malaysia ; School of Applied Physics, Faculty of Science and Technology, National University of Malaysia,, 2014)
      This study focuses on the mechanical effect of different composition of polymer blend. Polymer blend of high density polyethylene (HDPE) and ethylene propylene rubber (EPR) were selected and varied by three different ...

    • Potential of marine clay as raw material in geopolymer composite 

      Mohammad Tamizi, Selimin; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Datuk Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liyana, Jamaludin; Aeslina, Abdul Kadir, Dr. (Scientific.Net/Trans Tech Publications, 2012-12)
      In this research, marine clays has been studied its potential as a matrix composite materials that tend to be used as alternative materials to concrete. The study shows that marine clays which mixed with appropriate ...

    • Potential of Nanocellulose Composite for Electromagnetic Shielding 

      Nurul Fatihah Nabila, Yah; Hasliza, A. Rahim; Yeng Seng, Lee; Wee, Fwen Hoon; Mohd Fareq, Malek; Nik Adilah Hanin, Zahri; Hayati Hasibuan, Zainal (EDP Sciences, 2017)
      Nowadays, most people rely on the electronic devices for work, communicating with friends and family, school and personal enjoyment. As a result, more new equipment or devices operates in higher frequency were rapidly ...

    • Potential of palm oil clinker as reinforcement in aluminium matrix composites for tribological applications 

      Y. B., Zamri; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohammed Misbahul, Amin, Prof. Madya Dr. (University of Malaya, 2011)
      This research studied the potential of palm oil clinker as reinforcement in composite based aluminium for tribological applications. Palm oil clinker particle (POCp) reinforced aluminium matrix composites at different ...

    • Potential of upgrading domestic biomass into a higher energy density via torrefaction process 

      M. Iqbal, A.; Zainal Alimuddin, Zainal Alauddin, Dr.; Mohd Mustafa Al-Bakri, Abdullah; Musalmah, Mazlan, Prof. Dr.; Shahril Nizam, Mohamed Soid; Mohd Nasir, Kassim (Trans Tech Publications, 2013)
      Torrefaction is a thermal treatment step in a relatively low temperature range of 240-300°C, which aims to produce a higher energy biomass in terms of low heating value (LHV) and light weight properties. Biomass in wood ...

    • Potentiality of polysilicon nanogap structure for label-free biomolecular detection 

      Thikra S., Dhahi; Uda, Hashim, Prof. Dr.; Md Eaqub, Ali, Dr. (Emerald Group Publishing Limited, 2013)
      Purpose - The purpose of this paper was to systematically study the electrical properties of 5-, 42- and 75-nm gap polysilicon structures to evaluate the potentiality of these structures to be used in biomolecular sensing ...

    • The potentials of OCDM technique for local area network 

      Syed Alwee Aljunid, Syed Junid; Dayang Khadijah, Hamzah; Shariffah Zarihan, Syed Zaharim Helmi; Anuar, Mat Safar; Azremi, Abdullah Al Hadi; Mohamad Khazani, Abdullah (Institute of Electrical and Electronics Engineering (IEEE), 2006)
      Evolution of the optical fiber systems is currently seeing the general acceptance of wavelength division multiplexing (WDM) as the best mechanisms in increasing the transmission capacity of fiber optics. However, there are ...

    • A potentiometric indirect uric acid sensor based on ZnO nanoflakes and immobilized uricase 

      Syed Muhammad, Usman Ali, Dr.; Zafar Hussain, Ibupoto; Muhammad, Kashif; Uda, Hashim, Prof. Dr.; Willander, Magnus (MDPI, 2012-03)
      In the present work zinc oxide nanoflakes (ZnO-NF) structures with a wall thickness around 50 to 100 nm were synthesized on a gold coated glass substrate using a low temperature hydrothermal method. The enzyme uricase was ...

    • Power factor performance on 0.35 mm and 0.50 mm thicknesses of steel sheets for 0.5 Hp induction motor using FEM software 

      Yanawati, Yahya; Nor Hanisah, Baharudin; Tunku Muhammad Nizar, Tunku Mansur; Syatirah, Mohd Noor; Nor Shafiqin, Shariffuddin; Pungut, Ibrahim, Ir. (Science and Engineering Publishing Company, 2012-12)
      Decrease the thicknesses of steel sheets will increase the power factor of the 0.5 Hp induction motor. This paper presents the effect of thicknesses in power factor for non-oriented electrical steel sheets. The study was ...

    • Power flow and loss tracing in deregulated transmission system using proportional tree method 

      Mohd. Herwan, Sulaiman; Mohd. Wazir, Mustafa; Omar, Aliman (Praise Worthy Prize S.r.l., 2008)
      Tracing the flow of electricity becomes an important issue in transmission open access. This is due to transmission open access may bring the fairness and transparency to all users. Since the complexity of electrical ...

    • The power of cycling 

      Stannard, Steve; Macdermaid, Paul; Miller, Matthew; Fink, Phil (Kementerian Pendidikan Tinggi (KPT), Malaysia, 2015)
      One of the advantages of cycling exercise is that the rider is interfaced to a machine, and this exercise can be easily metered. Recent technological advances have made this metering easier and cheaper such that riders, ...