Browsing Journal Articles by Title

Now showing items 2081-2100 of 3156

    • Optical properties of GaN nanostructures for optoelectronic applications 

      Yarub, Al-Douri, Assoc. Prof. Dr. (Elsevier B.V., 2013)
      Electrochemical deposition method is used to prepare GaN nanostructure. The morphological studies using scanning electron microscopy (SEM), photoluminescence (PL) the refractive index and optical dielectric constant are ...

    • Optical properties of manganese chiral single ring by glancing angle deposition technique 

      Mahsa, Fakharpour (Universiti Malaysia Perlis (UniMAP), 2017)
      Embracing physical vapor deposition system, GLAD method defines the deposition angle, α, in terms of vapor flux and normal substrate. The substrate rotation angle, φ, defines the azimuthal substrate position relative to ...

    • Optical properties of Poly Vinyl Alcohol (PVA)/molasses as biodegradable films for agriculture applications 

      Ammar Al-kawaz; Auda Jabbar Braihi; Akram Jassim Jawad (Universiti Malaysia Perlis (UniMAP), 2021-10)
      Biodegradable polymeric films were prepared for agricultural applications. These films based on PVA/ molasses blend mixed with different concentrations (0, 10, 20, 30 and 40 wt. %). These films were characterized by FTIR ...

    • Optical properties of Si quantum dot potential under pressure effect 

      Yarub, Al - Douri (Trans Tech Publications, Switzerland., 2012)
      Further study of the quantum dot potential under hydrostatic pressure for Si is presented. This potential has been calculated by means of our recent empirical model. The indirect energy gap (Γ-X) is calculated using the ...

    • Optical properties of ultraphosphate glasses containing mixed divalent zinc and magnesium ions 

      Khor, Shing Fhan, Dr.; Zainal Abidin, Talib, Prof. Dr.; Mohd Fareq, Abd. Malek, Dr.; Cheng, Ee Meng, Dr. (Elsevier, 2013-01)
      Ternary zinc magnesium ultraphosphate glasses corresponding to (ZnO)x(MgO)30−x(P2O5)70 were prepared by melt quenching technique in the range of 5 ⩽ x ⩽ 20 mol%. The optical absorption spectra of the glasses were measured ...

    • Optical properties of ultraphosphate glasses containing mixed divalent zinc and magnesium ions 

      Khor, Shing Fhan, Dr.; Zainal Abidin, Talib, Prof. Dr.; Mohd Fareq, Abd. Malek, Dr.; Cheng, Ee Meng, Dr. (Elsevier B.V., 2013-01)
      Ternary zinc magnesium ultraphosphate glasses corresponding to (ZnO)x (MgO)30 x (P2O5)70 were prepared by melt quenching technique in the range of 5 6 x 6 20 mol%. The optical absorption spectra of the glasses were ...

    • Optical Spectrum CDMA: a new code construction for Double Weight Code Family 

      Mohammed, A; Saad, N.M; Syed Alwee Aljunid, Syed Junid; Anuar, Mat Safar; Mohamad Khazani, Abdullah (Institute of Electrical and Electronics Engineering (IEEE), 2006)
      This paper handles the Double Weight (DW) Code family, one of the proposed codes used in Spectral-Amplitude-Coding Optical Code Division Multiple Access (OCDMA). The DW code family is constructed using a matrix technique ...

    • Optical spectrum CDMA: A new code construction with zero cross correlation for double weight code family 

      Babekir, E.I.; Saad, N.M.; Elfadel, N.; Mohammed, A.; Aziz, A.A.; Anuar, Mat Safar; Syed Alwee Aljunid, Syed Junid; Mohamad Khazani, Abdullah (Institute of Electrical and Electronics Engineering (IEEE), 2007)
      This paper concentrates on Double Weight code family as a proposed code for the optical spectrum code division multiple access (OSCDMA) which has one cross correlation value. By eliminating the intersection columns of this ...

    • Optical tomography hardware development for solid gas measurement using mixed projection 

      Siti Zarina, Mohd Muji; Chiew, Loon Goh; Nor Muzakkir, Nor Ayob; Ruzairi, Abdul Rahim, Prof. Dr. ; Mohd Hafiz, Fazalul Rahiman, Dr.; Herlina, Abdul Rahim, Dr.; Muhammad Jaysuman, Pusppanathan; Naizatul Shima, Mohd Fadzil (Elsevier Ltd, 2013-10)
      The ability to implement fan beam projection in parallel view in an optical tomography setup is one of the novelties of this research. This design involves a sensor jig specifically designed for parallel applications that ...

    • Optical tomography system based on charge-coupled device linear image sensors: Particle size measurement 

      Idroas, M.; Ruzairi, Abdul Rahim; Mohd Hafiz, Fazalul Rahiman; Ibrahim, M. N. (Elsevier B.V, 2011-08)
      This paper discussed an optical tomography system based on charge-coupled device (CCD) linear image sensors. The developed system consists of a lighting system, a measurement section and a data acquisition system. Four CCD ...

    • Optical tomography system based on charge-coupled device linear image sensors: Particle size measurement 

      Mariani, Idroas; Ruzairi, Abdul Rahim; Mohd Hafiz, Fazalul Rahiman; M. N., Ibrahim (Elsevier B.V., 2011-08)
      This paper discussed an optical tomography system based on charge-coupled device (CCD) linear image sensors. The developed system consists of a lighting system, a measurement section and a data acquisition system. Four CCD ...

    • An optical tomography system using a digital signal processor 

      Ruzairi, Abdul Rahim; Chiam, Kok Thiam; Mohd Hafiz, Fazalul Rahiman (Molecular Diversity Preservation International (MDPI), 2008-03)
      The use of a personal computer together with a Data Acquisition System (DAQ) as the processing tool in optical tomography systems has been the norm ever since the beginning of process tomography. However, advancements in ...

    • Optical tomography system using digital signal processor: Velocity profile measurement 

      Ruzairi, Abdul Rahim; Chiam, Kok Thiam; Mohd Hafiz, Fazalul Rahiman; Yvette-Shan Li, Susiapan; Jayasuman, P. (Inderscience Enterprises Limited, 2009-06)
      The DSP system was customised to control the data acquisition process of 16 x 16 optical sensors array, arranged in parallel beam projection. The data collected was used to reconstruct the cross sectional image of the ...

    • Optical tomography system using microprocessor and ethernet 

      Ruzairi, Abdul Rahim; Goh, Chiew Loon; Chan, Kok San; Pang, Jon Fea; Leong, Lai Chan; Mohd Hafiz, Fazalul Rahiman (Emerald Group Publishing Limited, 2010-01-01)
      Purpose: Owing to the high cost of data acquisition (DAQ) card in the market, the purpose of this paper is to develop a high speed, low-cost microprocessor and ethernet controller-based DAQ in optical tomography system. ...

    • Optical tomography: A review on sensor array, projection arrangement and image reconstruction algorithm 

      Siti Zarina, Mohd. Muji; Ruzairi, Abdul Rahim; Mohd Hafiz, Fazalul Rahiman; Shafishuhaza, Sahlan; Mohd Fadzli, Abdul Shaib; Muhammad, Jaysuman; Elmy Johana, Mohamad (Kyushu Tokai University, 2011-07)
      This paper reviews previous research on sensor arrays, projection arrangements and image reconstruction algorithms of optical tomography for industrial processes. These include the review of sensor selection and projection ...

    • Optical tomography: Image improvement using mixed projection of parallel and fan beam modes 

      Siti Zarina, Mohd Muji; Ruzairi, Abdul Rahim, Prof. Dr.; Mohd Hafiz, Fazalul Rahiman, Dr.; Zarina, Tukiran; Nor Muzakkir, Nor Ayob; Elmy Johana, Mohamad, Dr.; Muhammad Jaysuman, Pusppanathan (Elsevier Ltd, 2013-07)
      Mixed parallel and fan beam projection is a technique used to increase the quality images. This research focuses on enhancing the image quality in optical tomography. Image quality can be defined by measuring the Peak ...

    • Optical tomography: Velocity profile measurement using orthogonal and rectilinear arrangements 

      Ruzairi, Abdul Rahim; Yusri, Mohd Yunosa; Mohd Hafiz Fazalul, Rahiman; Siti Zarina, Mohd Muji; Chiam, Kok Thiam; Herlina, Abdul Rahim (Elsevier Ltd., 2012-03)
      In tomography applications, flow velocity is an important flow characteristic for analysis. Excessively high particle velocity will cause high energy consumption, severe pipeline wear and particle degradation. This paper ...

    • Optical, electrical and photovoltaic studies of γ-MnS thin films deposited by spray pyrolysis technique 

      Amara, Z.; Khadraoui, M.; Miloua, R. (Universiti Malaysia Perlis (UniMAP), 2019-07)
      γ-MnS thin films were prepared on glass substrate by spray pyrolysis method at 280 °C. The optical constants and thickness of the films were extracted using the pattern search optimization technique in combination with a ...

    • Optically enhanced N doped ZnO amorphous nanostructures grown by low cost ultrasonicated sol–gel route 

      U. P. S. Gahlaut (Universiti Malaysia Perlis (UniMAP), 2022-07)
      N doped ZnO amorphous nanostructures with excellent optical properties were grown by the ultrasonicated sol-gel route. The samples were characterized using structural, morphological and optical studies. XRD patterns confirmed ...

    • Optimal coefficient of friction onartificial knee joint contact surfaces 

      Mohd Hafis, Sulaiman; Nur Farahana, Ramli; Mohd Ridzuan, Mohd Jamir; Nur Adlina, Mohd Takhiudin (Trans Tech Publications, 2013)
      Wear generated by the presence of frictiononknee joint contact surfaces can cause debris, which may lead to failure of the artificial knee joint. In this study, the effects of friction coefficients occur on the knee joint ...