Browsing Journal Articles by Title
Now showing items 1886-1903 of 2743
-
P-recovery as calcium phosphate from wastewater using an integrated selectrodialysis/crystallization process
(Elsevier, 2014)A promising and sustainable renewable source of phosphate was obtained through crystallization of calcium phosphate from wastewater. The aim of the present study was to evaluate the feasibility of an integrated ... -
Paints based on waste expanded polystyrene
(Smithers Rapra Technology, 2010)A formula for making paint was developed using waste expanded polystyrene foam (EPS) as a binder. This method replaces the alkyd resin in most commercial paint, which is derived from the byproducts of refi ning crude oil. ... -
Palmprint recognition using principle component analysis implemented on TMS320C6713 DSP processor
(Universiti Teknikal Malaysia Melaka, 2016)This paper presents a human identification system using eigen-palm images. The proposed method consists of three main stages. The preprocessing stage computes the palmprint images to capture important information and produce ... -
Paraffinic mineral oil lubrication for cold forward extrusion: Effect of lubricant quantity and friction
(Elsevier Ltd., 2013)In this paper, Finite Element (FE) and experimental analyses have been developed on the deformation of aluminium billet over a tool. Effect of friction resulted from the use of additive-free ISO460-compliant paraffinic ... -
Parameter optimization of fused deposition modeling process for 3D printed prosthetic socket using PCR-TOPSIS method
(Universiti Malaysia Perlis (UniMAP), 2022-03)Prosthetic socket plays the most important role in lower limb prosthesis. The conventional fabrication process of prosthetic socket is labor intensive and time-consuming. The application of additive manufacturing technology ... -
Parametric analysis of sound transmission loss in a rectangular duct attached with resonator silencer
(Universiti Malaysia Perlis (UniMAP), 2022-03)Noise is an existing problem that exist in the environments produced from vibrating sources. In general, the common solutions for noise control are: (1) redesigning the system the system for instance increasing wall ... -
Parametric performance simulation of a proximity-coupled fed microstrip dipole array
(Institute of Electrical and Electronics Engineering (IEEE), 2008-05-19)This work reports on the performance simulation of two element units of microstrip dipole array antennas for WLAN application. Simulation is done using two different simulation techniques, the circuit model (CM) derived ... -
Parametric studies of the pyramidal microwave absorber using rice husk
(Institute of Electrical and Electronics Engineers (IEEE), 2010)Agriculture waste has potential to be used as an alternative material for the microwave absorber used in the anechoic chamber. Compared to the current materials used, such as polystyrene and polyurethane, agricultural waste ... -
Parametric study and thickness evaluation of photoresist development for the formation of microgap electrodes using surface nanoprofiler
(Scientific.Net, 2012-12)A compact nanolaboratory on single chip is one of the challenging tasks for future reproductively of sensitive and selective lab-on-chip. This paper reports a simple and controllable technique for patterning microgap ... -
Particle size – dependent on the static and dynamic compression properties of polypropylene/silica composites
(Elsevier, 2013-03)The effect of particle size is widely known as an essential factor that influences the mechanical properties of particulate filled polymer composites. However, there is a limited number of works available, on the particular ... -
Pathological infant cry analysis using wavelet packet transform and probabilistic neural network
(Elsevier Ltd., 2011-11)A new approach has been presented based on the wavelet packet transform and probabilistic neural network (PNN) for the analysis of infant cry signals. Feature extraction and development of classification algorithms play ... -
Patients tremble analysis under different camera placement in critical care
(Science Academy, 2011-03)This paper presents an integrated system for detecting facial changes of patient in a hospital in Intensive Care Unit (ICU). In this research we have considered the facial changes most widely represented by eyes and mouth ... -
PCB inspection for missing or misaligned components using background subtraction
(World Scientific and Engineering Academy and Society (WSEAS) Press, 2009)Automated visual inspection (AVI) is becoming an integral part of modern surface mount technology (SMT) assembly process. This high technology assembly, produces printed circuit boards (PCB) with tiny and delicate electronic ... -
Pearson’s Correlation Coefficient Analysis of non-invasive Jaundice Detection based on Colour Card Technique
(IOP Publishing, 2019)Jaundice is describes as yellow discoloration of the skin and other tissues of a newborn infant. It happens when the bilirubin pigment rises up to 5 mg/dL or 85 μmol/L due the organs just started to developed. 75% of ... -
Peer assessment: exploring tertiary student's view
(Universiti Malaysia PerlisCentre of International Languages, 2014-02)In past decades, peer-assessment has been promoted as a valuable approach to enhance students learning experience and has been used to develop autonomous learning environment. This paper is intended to evaluate on university ... -
Pellet reactor pretreatment: A feasible method to reduce scaling in bipolar membrane electrodialysis
(Elsevier Inc., 2013-07)This study aims to evaluate the feasibility of a pellet reactor in reducing the scaling potential in electrodialysis with bipolar membranes for water containing a high concentration of calcium by adding sodium carbonate ... -
Pembentukan Instrumen Motif Penglibatan Remaja dalam Sukan
(Kementerian Pendidikan Tinggi (KPT), Malaysia, 2019)Kajian ini bertujuan membentuk instrumen untuk mengenal pasti motif penglibatan remaja dalam bidang sukan. Instrumen Motif Penglibatan Sukan (MPS) dibina melalui dua fasa penyelidikan iaitu fasa penggubalan item dan ujian ... -
Pembinaan modul latihan Mindfulness Acceptance Commitment-Physical (Mac-P) untuk daya tahan aerobik
(Kementerian Pendidikan Tinggi (KPT), Malaysia, 2019)The Mindfulness Acceptance Commitment-Physical (MAC-P) training module aims to improve physical training performance as in aerobic exercise. The face and content validity of the MAC-P Module has been accepted by the expert ...