Browsing Journal Articles by Title

Now showing items 1656-1675 of 2769

    • Modified cocoa pod husk-filled polypropylene composites by using methacrylic acid 

      Koay, Seong Chun; Salmah, Husseinsyah, Prof. Madya Ir. Dr.; Hakimah, Osman, Dr. (North Carolina State University, 2013-08)
      The effect of filler modification using methacrylic acid (MAA) on polypropylene (PP)/cocoa pod husk (CPH) composites was studied. The performances of unmodified and modified PP/CPH composites were analyzed for torque ...

    • Modified corn cob filled chitosan biocomposite films 

      Chan, Ming Yeng; Salmah, Husseinsyah, Prof. Madya Ir. Dr.; Sam, Sung Ting, Dr. (Taylor and Francis Group, LLC., 2013-11)
      The present work was investigated the effect of filler content and chemical modification on mechanical, thermal properties and morphology study of CS/CC biocomposite films. The acrylic acid was used as chemical modification ...

    • Modified global and modified linear contrast stretching algorithms: New colour contrast enhancement techniques for microscopic analysis of malaria slide images 

      Aimi Salihah, Abdul-Nasir; Mohd Yusoff, Mashor, Prof. Dr.; Zeehaida, Mohamed, Dr. (Hindawi Publishing Corporation, 2012)
      Malaria is one of the serious global health problem, causing widespread sufferings and deaths in various parts of the world. With the large number of cases diagnosed over the year, early detection and accurate diagnosis ...

    • Modular architecture of a non-contact pinch actuation micropump 

      Chee, Pei Song; Rashidah, Arsat. Dr.; Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Ruzairi, Abdul Rahim, Prof. Dr.; Leow, Pei Ling (MDPI, Basel, Switzerland., 2012-09)
      This paper demonstrates a modular architecture of a non-contact actuation micropump setup. Rapid hot embossing prototyping was employed in micropump fabrication by using printed circuit board (PCB) as a mold material in ...

    • Moldability characteristics of 3 mol% yttria stabilized zirconia feedstock for micro-powder injection molding process 

      Hafizawati, Zakaria; Norhamidi, Muhamad; Abu Bakar, Sulong; Farhana, Foudzi (Universiti Kebangsaan Malaysia, 2014)
      Micro-powder injection molding (μPIM) is a promising process that may satisfy the demand on miniaturization parts to micro domain in mass production with low manufacturing cost. Three mol% yttria stabilized zirconia (YSZ) ...

    • Monitoring Firmness Evolution of Round Eggplant (Solanum Melongena L.) During Storage by Non‐Destructive Acoustic Method 

      Nor Shuhada, Mohamad; Hashim, M. K. R.; Uda, M. N. A.; Nur Khuzaima (Universiti Malaysia Perlis (UniMAP), 2018)
      A few years ago, the inspection of impact quality and maturity for fruits and vegetables by using different methods and devices has become the focus of extremely intensive research. Firmness is one of the major factors ...

    • Monitoring System for uninterruptible power supply 

      Sohiful Anuar, Zainol Murad; Mohd Nazrin, Md Isa; Norazeani, Abdul Rahman (Science Publications, 2007)
      In industrial process today, reliability of equipment is very important. Power supply must be able to cater the need of industrial process. In case of power failure, backup power supply system must be able to support the ...

    • Morphemic analysis instruction in developing students’ English vocabulary 

      Aree, Tehlah (Universiti Malaysia PerlisCentre of International Languages, 2014-02)
      The purpose of this study were: 1) to investigate the learners’ background knowledge of English vocabulary; 2) to investigate the effectiveness of morphemic analysis instruction (MAI) in developing students’ English ...

    • Morphological, optical, and Raman characteristics of ZnO nanoflakes prepared via a sol-gel method 

      Mohammad, Kashif; Syed Muhammad, Usman Ali; Mohamed A, Mohd Ali; Abdulgafour, H. I.; Uda, Hashim, Prof. Dr.; Willander, Magnus; Zainuriah, Hassan (WILEY-VCH Verlag GmbH & Co., 2012-01)
      Two-dimensional (2D) ZnO nanoflakes were grown on thin aluminum layer, deposited on silicon substrate, using a sol-gel method. The surface morphologies of ZnO nanoflakes at different precursor concentrations were studied ...

    • Morphological, structural, and electrical characterization of sol-gel-synthesized ZnO nanorods 

      Muhammad Kashif, Muhammad Faroow; Uda, Hashim, Prof. Dr.; Md Eaqub, Ali, Dr.; Foo, Kai Loong; Syed Muhammad Usman, Ali Shah, Dr. (Hindawi Publishing Corporation, 2013)
      ZnO nanorods were grown on thermally oxidized p-type silicon substrate using sol-gel method. The SEM image revealed high-density, well-aligned, and perpendicular ZnO nanorods on the oxidized silicon substrate. The XRD ...

    • Morphological, structural, and gas-sensing characterization of tin-doped indium oxide nanoparticles 

      Ayeshamariam, A.; Muhammad, Kashif; Bououdina, M.; Uda, Hashim, Prof. Dr.; Jayachandran, M.; Md. Eaqub, Ali (Elsevier, 2014-01)
      Tin-doped indium oxide (ITO) nanoparticles with stable cubic phases were synthesized using a sol–gel combustion method that includes gelation and combustion in organic fuel. The influence of SnO₂ on the phase and morphology ...

    • Morphology analysis of vertebral trabecular bone under dynamic loading based on multi-scale theory 

      Khairul Salleh, Basaruddin; Takano, Naoki; Yoshiwara, Yuto; Nakano, Takayoshi (Springer-Verlag, 2012-10)
      Trabecular bone has a complicated porous microstructure and consists of interconnected plates and rods known as trabeculae. The microarchitecture of the trabeculae contributes to load distribution capacity and, particularly, ...

    • Morphology and optical investigations of ZnO pyramids and nanoflakes for optoelectronic applications 

      N. K., Hassan; M. Roslan, Hashim; Yarub, Al - Douri (Elsevier, 2014-06)
      Zinc-oxide (ZnO) pyramidal and nanoflakes were grown by electrochemical deposition of Zn(NO3)2·6H2O on n-type Si substrate with different crystallographic orientations and on indium tin oxide (ITO)-coated glass. Various ...

    • Morphology, analysis and properties studies of CdS nanostructures under thiourea concentration effect for photovoltaic applications 

      Yarub, Al-Douri, Assoc. Prof. Dr.; Jamal H., Waheb; Mohammed Ameri; Khenata, R.; Abdelmadjid, Bouhemadou; Ali Hussain, Reshak, Prof. Dr. (Electrochemical Science Group, 2013-08)
      CdS nanostructures are prepared by sol-gel spin coating method using different thiourea concentrations. The thiourea concentration effect for CdS nanostructures deposited on quartz substrate is studied. The CdS nanostructures ...

    • MosIn Trap the intelligent mosquito trap 

      Mohd Faizal, Zainul; Idza Zulzila, Idris; Mohammad Nur Khairul Hafizi, Rohani; Umar, Kassim; Syed Amirul Haziq, Syed Mohd Abid; Aniq Naim, Aziz; Muhammad Danial Shafiq, Azami (Universiti Malaysia Perlis (UniMAP), 2020)
      Currently, dengue and malaria have been epidemic diseases over 129 countries which is 70% of the actual burden is in Asia. There are many electronic mosquito traps on shelve market. However, the trap only apply fan and UV ...

    • Motivation influence towards physical activity level among University staff 

      Azlan, Kamal; Mohd. Radzani, Abdul Razak (Kementerian Pendidikan Tinggi (KPT), Malaysia, 2016)
      Levels of physical activity are usually affected by a high motivational factor. There are many internal and external motivational factors. Less physical activity or a sedentary lifestyle can be defined as movement of the ...

    • Movement pattern recognition ability of Malaysian rhythmic gymnastics judges 

      Kok Lian, Yee; Teh Lah, Hoong (Kementerian Pendidikan Tinggi (KPT), MalaysiaDepartment of Sport Studies, Faculty of Educational Studies, Universiti Putra Malaysia., 2013)
      This study examined the significance of movement pattern recognition ability in the judging performance of 30 rhythmic gymnastics judges who were classified correspondingly as expert, non-expert and novice. Results ...

    • Moving vehicle detection using time domain statistical features 

      Paulraj, Murugesa Pandiyan, Prof. Dr.; Abd Hamid, Adom, Prof. Dr.; Siti Marhainis, Othman; Sathishkumar, Sundararaj (Trans Tech Publications, 2014)
      The Hearing Impaired People (HIP) cannot distinguish the sound from a moving vehicle approaching from their behind. Since, it is difficult for hearing impaired to hear and judge sound information and they often encounter ...

    • Moving vehicle recognition and classification based on time domain approach 

      Paulraj, Murugesa Pandiyan, Prof. Dr.; Abd Hamid, Adom, Prof. Dr.; Sathishkumar, Sundararaj; Norasmadi, Abdul Rahim (Elsevier Ltd, 2013)
      Differentially Hearing Ability Enabled (DHAE) community cannot discriminate the sound information from a moving vehicle approaching from their behind. This research work is mainly focused on recognition of different vehicles ...

    • A Multi band mini printed omni directional antenna with v-shaped for RFID applications 

      Evizal; Tharek, Abd. Rahman, Prof. Dr.; Shahrul Kamal, Abd Rahim, Prof. Madya Dr. Ir.; Mohd Faizal, Jamlos, Dr. (EMW Publishing, 2011)
      This paper presents a mini multi-band printed omni-directional antenna with v-shaped structure for radio frequency identification (RFID) applications. The proposed multi-band antenna is developed from the initial v-shaped ...