School of Materials Engineering (Theses)
Browse by
Recent Submissions
-
Preparation and characterization of linear low denstity polyethylene LLDPE/Thermoplastic Starch (TPS)/Banana fiber composites
The blending of linear low density polyethylene (LLDPE) with thermoplastic starch (TPS) and filled with banana fiber (BF) were investigated. Two types of systems were prepared; the LLDPE/TPS matrix with different blend ... -
Properties and biodegradability of waste paper foam filled Polyurethane foams composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2010)The research is focused to study the properties of polyurethane foam reinforced with different types and content of waste paper. The comparison of the effects of three types of waste paper, such as paper sludge (PS) , old ... -
Corrosion behaviour on AA2014/15vol. %A1₂0₃P and AA2009/20vol. %SiCw composite after ageing treatment
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2007)The purpose of this study is to compare the corrosion behaviour between AA2014/15vol. %A1₂0₃P and AA2009/20vol. %SiCw composites after ageing treatment. The former composite was cast composite supplied by Duralcan USA. The ... -
Microstructure and properties of sintered Co-Cr-Mo alloy powder under different processing conditions
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2011)Co-Cr-Mo (ASTM F-75) alloy is one of the most important metallic biomaterials that are commonly used for surgical implant due to its mechanical properties, good wear resistance and biocompatibility. This study has focused ... -
Preparation and characterization of modified polypropylene/ palm kernel shell (PP/PKS) biocomposites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2012)The research on palm kernel shell (PKS) and polypropylene (PP) biocomposites consists of four parts. The first part is mainly to investigate the effect of incorporating PKS as filler on the mechanical, water absorption, ... -
Gold leaching process and recovery from gold scraps using ascorbic acid
(Universiti Malaysia PerlisSchool of Materials Engineering, 2010)A new process of gold leaching which involves the use of hydrochloric acid, sulphuric acid and sodium nitrate was studied. A series of screening study was conducted to identify the most suitable of these acids that capable ... -
A study on nanostructured of anodised aluminium template Synthesised by the mixture of phosphoric acid and acetic acid
(Universiti Malaysia PerlisSchool of Materials Engineering, 2010)The formation of anodic aluminium oxide (AAO) film in anodising process has been studied. The anodising process was done in a mixture of phosphoric acid and acetic acid. The purpose of mixed acid solution as electrolyte ...
RSS 1.0