Search
Now showing items 1-10 of 10
Characterization and properties of palm kernel shell filled low density polyethylene biocomposites
(Universiti Malaysia Perlis (UniMAP), 2011)
Biocomposites based on palm kernel shell (PKS) and low density polyethylene (LDPE) was investigated. The biocomposites were prepared by using Z-Blade mixer at processing temperature 180 oC and rotor speed 50 rpm. The effect ...
The effect of the processing conditions on the mechanical and dielectric properties of epoxy foam
(Universiti Malaysia Perlis (UniMAP), 2011)
Epoxy foam was fabricated using sodium bicarbonate as the blowing agent. The epoxy foams were prepared using mechanical mixing method. Epoxy used in this study was product of bisphenol A and epichlorohydrin and the curing ...
Physical properties and corrosion behaviour of Co-Cr-Ni alloy developed by powder metallurgy
(Universiti Malaysia Perlis (UniMAP), 2011)
Cobalt-based alloys have been widely used in biomedical application. In this research, 11 different compositions of cobalt-chromium-nickel (Co-Cr-Ni) alloys were developed by powder metallurgy route. Scanning electron ...
Synthesis of carbon nanomaterials using chemical vapor deposition technique for liquid adsorption
(Universiti Putra Malaysia (UPM), 2011-09)
The synthesis of Carbon Nanotubes (CNTs) and Helical Carbon Nanofibers (HCNFs) using Floating Catalyst-Chemical Vapor Deposition method (FC-CVD) is reported. Acetone and ethanol are used as carbon sources, hydrogen as ...
Characterization and properties of recycled polypropylene (RPP)/chloroprene rubber (CR) blends
(Universiti Malaysia Perlis (UniMAP), 2011)
The thermoplastic elastomer of recycled polypropylene (RPP) and chloroprene rubber
(CR) blends were studied. Virgin polypropylene (PP)/chloroprene rubber blends were
used as comparison. The blends were prepared by using ...
Characterization and properties of palm fiber filled unsaturated polyester composites
(Universiti Malaysia Perlis (UniMAP), 2011)
The research on characterization and properties of palm fiber (PF) filled unsaturated polyester (UP) was investigated. The composites were prepared by using hand lay up technique before cured on oven about 10 minutes at ...
Effect of filler’s type, content and mixing method on properties of low density polyethylene/natural rubber (LDPE/NR) composites
(Universiti Malaysia Perlis (UniMAP), 2011)
This study was based on preparation of low density polyethylene (LDPE) and natural rubber (NR) composites with three types of fillers (Silica, Corn Starch and Coconut Husk) and different contents (10, 20 and 30 phr) using ...
A study on physical separation processes for recovery metals from waste printed circuit boards (PCBs)
(Universiti Malaysia Perlis, 2011)
In view of increasing the waste PCBs, a physical separation process has been carried out to
recover metals from waste PCBs. This research is aimed to implement an effective and
environmental friendly recovery particularly ...
Simulation and correlation of the melt flow characteristic using Polystyrene in usymmetrical cavity injection mold
(Universiti Malaysia Perlis (UniMAP), 2011)
In plastic injection molding. the problems found in the mold design stage are the
capability on plastic flow and unsymmetrical cavity on the injection molding. Different thickness. morphology and volume on cavities have ...
Microstructure and properties of sintered Co-Cr-Mo alloy powder under different processing conditions
(Universiti Malaysia Perlis (UniMAP), 2011)
Co-Cr-Mo (ASTM F-75) alloy is one of the most important metallic biomaterials that are
commonly used for surgical implant due to its mechanical properties, good wear resistance
and biocompatibility. This study has focused ...