School of Microelectronic Engineering (FYP): Recent submissions

Now showing items 101-120 of 153

    • High speed six operands 16-bits carry save adder 

      Awatif Hashim (School of Microelectronic Engineering, 2007-03)
      Adders are commonly found in the critical path of many building blocks of microprocessors and digital signal processing chips. The most important for measuring the quality of adder designs in the past were propagation ...

    • Ultra low power 8-bit microcontroller using Super Cut-Off CMOS (SCCMOS) 

      Sa Nuth Nai Chuan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      As the advances of VLSI technology, low power design has become an important topic in VLSI design. Scaling down supply voltage is an effective way for power reduction because of its quadratic relationship to dynamic ...

    • Study the effect of bird’s beak on Fully Recessed LOCOS and Poly Buffered LOCOS using 2 different pad Oxide 

      Hafizal Hafiz Sarjoni (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Device isolation is one of the most important technology features towards the realization of very large scale CMOS device integration. Since the early days of semiconductor industry, LOCOS isolation has been the major ...

    • Design and implementation of a Music Box using FPGA 

      Tan Kian Yiak (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      A design and implementation of music box using FPGA is presented in this report. FPGA is a digital logic chip that can be programmed to do almost any digital function. An effort has been carried out to make the FPGA to ...

    • Low Power Multiplier Accumulator (MAC) unit using Multiple Threshold CMOS 

      Tang Fhan Thin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Recently, there has been an increasing demand for portable, battery-operated devices like cellular phones and notebook computers. Scaling causes sub-threshold leakage currents to become a large component of total power ...

    • Visual Basic Implementation of Electronic Azan Reciter 

      Marlina Abu Bakar (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      An electronic azan reciter is the program that wills shows the clock and 5’s daily prayer time for each city in Malaysia. This software will remind the user 5 minutes before azan and after azan. This software has been ...

    • A Study on Surface Roughness and Morphology of Galliumoxide Doped Ba0.5Sr0.5TiO3 Thin Film 

      Fadrul Hisham Mohd Fauzi (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      Thin films of perovskite BaxSr1−xTiO3 system are promising candidates for microelectronic devices that can be integrated to semiconductor circuits. The leadfree solid solution BaxSr1−xTiO3 (BST) is a high permittivity ...

    • Effect of Annealing Temperature and Dopant Concentration on the Surface Layer of Indium Doped Ba0.5Sr0.5TiO3 Thin Film 

      Noor Khairul Anuar Johari (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Barium strontium titanate (Ba0.5Sr0.5TiO3) is one of the most important sensing materials for multi-function sensors. Basically, the sensing properties can be controlled by minor modification of the dopants. The purpose ...

    • Study in Design of 32 X 4Bit Static Random Access Memory (SRAM) 

      Nor Bashariah Muhamad Bakhtiar (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Study in design Static Random Access Memory (SRAM) using Mentor Graphic and simulation process with Eldo simulator. The research made on the operation of six transistors, its advantage over Dynamic Random Access Memory ...

    • Simulation Of 0.35 Um NMOS Process Based on UniMAP Cleanroom Facilities 

      Izny Atikah Ahmad Fahmi (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      The Micro Fabrication Cleanroom in University Malaysia Perlis (UniMAp) was completed in December 2003 and was built as a teaching laboratory. The goal of this project is to simulate a 0.35um negative-metal-oxide-semiconductor ...

    • The Effect of Annealing Temperature and Dopant Concentration on the Surface Layer of Vanadium Doped Barium Strontium Titanate (BVST) Thin Film 

      Siti Norhaida Abdul Rahman (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Vanadium is classified as a transition metal and is the most important in its group. It finds extensive use in the manufacturing of special steels with exceptional strength and toughness. The dopant concentration of ...

    • Improvement of SiGe HBT Design and Technology Performance using Device Simulation 

      Nurradila Ramlan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Simulation of the effect of various design parameters on the performance of the HBT is essential for obtaining the optimized design. This is based on the requirement for a reliable computation of the HBT performance. ...

    • Comparisons of 2 Bit Mirror Adder, Dynamic Adder and Pipelined Adder Using Mentor Graphics 

      Kamarul Azman Gesly (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      In this project the main topology of two bit adder including the most interesting of those recently proposed, are compared for delay, power dissipation, area and power delay product (PDP) . The comparison has been performed ...

    • Simulation of Ion Implantation using Monte Carlo Method for Investigation on Ion Trajectories 

      Zainab Ramli (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      The goal of simulating the ion implantation is to predict the distribution of implanted ions in the target and also to predict the amount of damage generated in the target. During ion implantation process, accelerated ions ...

    • Microfluidic Poly-Si Electrodes Capacitor ( Fabrication & Testing ) 

      Esmal Fhadly, Abd Malek (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      In this project, I have to design, fabricate and testing a Microfluidic capacitor. The dielectric insulator is replaced with a dielectric fluid (deionized water) instead of usual solid state materials. The conductive ...

    • Study of Semi-Recessed LOCOS for Quasi-nanoscale CMOS Device Isolation 

      Mohamad Idzham Abd Sani (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This project is entitled as semi-recessed LOCOS for CMOS device isolation. Local oxidation (LOCOS) technique is a widely used method for device isolation in semiconductor process integration. It is a simple, cheap yet and ...

    • 16-Bits High Speed Carry Select Adder 

      Nur Syuhada Muhammad Khariri (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This report presents the design, performance evaluation of two design of 16-bit carry select adder. The layout for the high speed 16-bits carry-select adder was present in this report. The comparison of both designs is to ...

    • 16-Bits Carry Look-Ahead Adder as a High Speed Adder 

      Normala Muhd. Hussain (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      This paper put emphasis on designing a modified carry look-ahead adder (CLA) to acquire a high speed carry look ahead in seeing as speed is the significant characteristics to a Central Processor Unit. After some historical ...

    • Analysis of Switched Mode Power Supply (SMPS) with Energy Saving Requirement 

      Ang Swee Liew (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Nowadays, the Switched-Mode Power Supply (SMPS) plays an important role in the consumer power market. With its small size, it can be found everywhere from mobile phone chargers to Plasma TVs or even in compact dics players ...

    • Study and Design the Current Mirror using Bulk-Driven Technique for Low Voltage Analog 

      Mohd Faidzul Bukhari Mohd Kanafiah (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Current Mirrors are core structure for almost all analog and mixed mode circuits and the performance of analog structures largely depends on the characteristic. In this design, the design presents some of the low voltage ...