Search
Now showing items 1-10 of 27
Comparisons of 2 Bit Mirror Adder, Dynamic Adder and Pipelined Adder Using Mentor Graphics
(Universiti Malaysia Perlis, 2007-04)
In this project the main topology of two bit adder including the most interesting of
those recently proposed, are compared for delay, power dissipation, area and power delay product (PDP) . The comparison has been performed ...
Low Power Multiplier Accumulator (MAC) unit using Multiple Threshold CMOS
(Universiti Malaysia Perlis, 2007-04)
Recently, there has been an increasing demand for portable, battery-operated
devices like cellular phones and notebook computers. Scaling causes sub-threshold leakage currents to become a large component of total power ...
Design of Voltage Control Oscillator (VCO) In 0.18u CMOS
(Universiti Malaysia Perlis, 2007-03)
This VCO are designated using cascade technique and differential common-mode change. The measured are 4 stages at 2.0GHz with power dissipation 20mWatt. For this final year project,mentor grahics software has use for design ...
Comparison of Various Barrel Shifter
(Universiti Malaysia Perlis, 2007-05)
Barrel shifters are often utilized by embedded digital signal processors and
general-purpose processors to manipulate data. This project design alternatives for 16
bit barrel shifters that perform the following function ...
Design and analysis CMOS Cascode amplifier
(Universiti Malaysia Perlis, 2008-03)
The design of CMOS cascode amplier is presented which it will constructed with the circuit of current mirror and two transistor are placed in cascode topology. The design need to achieve the value that will meet the ...
Electrical characterization of 0.15µm CMOS Transistor using TSUPREM-4 and MEDICI
(Universiti Malaysia Perlis, 2008-04)
Physical and electrical characteristics of 0.153m Complementary Metal Oxide Semiconductor (CMOS) were studied. Fabrications of the devices were done by
TSUPREM-4 simulator and electrical characteristics extraction will ...
Stable 2 Stage CMOS Amplifier
(Universiti Malaysia Perlis, 2007-04)
In the last few years there has been an effort to integrate electrochemical instrumentation. A critical component of such a system is an amplifier. These projects design a “Stable Two stage CMOS amplifier”. This is achieved ...
Study of Semi-Recessed LOCOS for Quasi-nanoscale CMOS Device Isolation
(Universiti Malaysia Perlis, 2007-03)
This project is entitled as semi-recessed LOCOS for CMOS device isolation. Local oxidation (LOCOS) technique is a widely used method for device isolation in semiconductor process integration. It is a simple, cheap yet and ...
Ultra low power 8-bit microcontroller using Super Cut-Off CMOS (SCCMOS)
(Universiti Malaysia Perlis, 2007-04)
As the advances of VLSI technology, low power design has become an important topic in
VLSI design. Scaling down supply voltage is an effective way for power reduction because
of its quadratic relationship to dynamic ...
The Effect of Process Parameters on Metal Step Coverage for Aluminum by Evaporation Technique
(Universiti Malaysia Perlis, 2007-03)
The degree to which deposited metals cover steps over topography is important to the yield and reliability of devices in very large scale integrations (VLSI). In evaporated and sputtered thin films, the most difficult steps ...