Browsing School of Materials Engineering (FYP) by Author "School of Materials Engineering"
Now showing items 1-20 of 42
-
Adsorption of heavy metal ions by using magnetite nanoparticles
Raudah, Amin Abdillah (Universiti Malaysia Perlis (UniMAP), 2017-06)This thesis outlines the study of an adsorption of heavy metal ions by magnetite nanoparticles. Magnetite nanoparticles were synthesized from five different concentration of ferrous sulfate heptahydrate, FeSO4.7H2O as iron ... -
Anodizing process of Mg alloy using low potential
Siti Auni Shafiqah, Makhtar (Universiti Malaysia Perlis (UniMAP), 2017-04)This project is focusing on the effect of anodizing on the coating Mg alloys. The Mg alloy was cut with constant length and width. The AZ80 is the type of Mg alloy used. It has high strength but also have high corrosion ... -
Application of Ag/Zno nanoparticles as photocatalyst for self cleaning fabric
Siti Zulaiha, Mohmad Sahbudin (Universiti Malaysia Perlis (UniMAP), 2017-06)This project is to study the ability of ZnO particles as photocatalyst in self-cleaning fabric and to improve the photocatalytic activity of self-cleaning fabric by doping ZnO with Ag nanoparticles. Both ZnO and Ag/ZnO ... -
Development of Al-Ni-Cu amorphous alloy powder
Norliyana, Mustapar (Universiti Malaysia Perlis (UniMAP), 2017-06)Mechanical alloying (MA) process was used in this research to produce amorphous alloy powder by mixing Al, Ni, Cu powder in the planetary ball mill (pbm) for 8 hours, 16 hours and 24 hours corresponding to the two ... -
Effect of ball to powder ratio and media density on fine grinding and mechanical activation of hematite ores in planetary mill
Siti Izatul Hawa, Khairol Salleh (Universiti Malaysia Perlis (UniMAP), 2017-06)Raw hematite ore from Kulim, Kedah was mechanically activated using physical technique of powder ball milling. Operational parameter during fine grinding of the hematite ore are ball to powder ratio (3:1, 5:1, 7:1), milling ... -
Effect of Citric acid on properties of Cassava starch foam
Nur Fatehah, Shafari (Universiti Malaysia Perlis (UniMAP), 2017-06)The effects of citric acid towards the properties of cassava starch foam was studied in this thesis. The influences of crosslinking on cassava starch was described fundamentally. This include the formation of cell sizes, ... -
The Effect of Granulated Blast Furnace Slag (GBFS) Composition on Geopolymer Paste Properties
Nurul Nabihah, Abdul Razak (Universiti Malaysia Perlis (UniMAP), 2017)For the research study, I will perform the effect of Granulated Blast Furnace Slag (GBFS) composition on geopolymer paste properties. For my final year project, I will use raw materials of slag and fly ash that was provided ... -
Effect of MAPP coupling agent on the mechanical and morphological properties of the Polypropylene/Aluminum Hydroxide composites
Soo, Chang Ru (Universiti Malaysia Perlis (UniMAP), 2017)To improve the compatibility of aluminum hydroxide (Al(OH)3) and polypropylene (PP), the effect of maleic anhydride-grafted polypropylene (MAPP) on the mechanical and morphological properties of 15 wt.% Al(OH)3/PP composites ... -
Effect of mixing parameter on epoxy composites: mechanical and microscopy analysis
Ng, Soo Li (Universiti Malaysia Perlis (UniMAP), 2017-06)Effect of mixing speed and mixing time on epoxy/nanoclay composites’ mechanical and morphology properties has been studied in this paper. Fixed amount of nanoclay (3phr) was used to mix by 250 rpm and 500 rpm for 1, 2, 2.5 ... -
The effect of Nickel addition for glass formability of Cu-Ti-Ni amorphous alloy
Wan Ahmad Aiman, Wan Salleh (Universiti Malaysia Perlis (UniMAP), 2017-05)The Cu50-Ti50 powders were prepared in this project in terms of glass formability and kinetic behaviour with the addition of Ni on different percentages (X= 5%, 10%) by mechanical alloying using planetary ball mill. Before ... -
Effect of solvent on mechanical properties of Poly(Methyl Methacrylate)/Palm Kernel Shell composites
Norfarahim, Torman (Universiti Malaysia Perlis (UniMAP), 2017-06)This project is focused on the effect of solvent on the properties of Poly (Methyl Methacrylate) (PMMA) composites filled with palm kernel shell (PKS). The PMMA/PKS composites with different filler loading were prepared ... -
The effect of temperature on the nitriding of Aluminium
Nur Farhana, Mohd Firdaus Ravi (Universiti Malaysia Perlis (UniMAP), 2017-06)In this thesis writing, aluminium undergoes nitriding at three different temperatures which is 600°C, 625°C and 650°C. The surface also have been grind and polish with 800, 320 grinder paper and the other variable is rough ... -
The effect of treated and untreated Citronella filler loading on curing characteristic and mechanical properties of NR/SBR blends
Ooi, Wooi Keat (Universiti Malaysia Perlis (UniMAP), 2017-04)In this research, the effect of treated and untreated of Citronella filler loading from 10 phr until 50 phr on curing characteristic and mechanical properties of NR/SBR blends were studied. The Citronella leaves were ... -
Effect of winding angles on the epoxy/kenaf/glass fiber hybrid composite by filament winding process
Mahtumah, Hosnani (Universiti Malaysia Perlis (UniMAP), 2017-06)The study on the effect of winding angle on the mechanical properties of the kenaf/glass fiber epoxy hybrid composite was successfully conducted. In this paper, epoxy matrix, kenaf and glass fiber were selected as the raw ... -
Effect of Zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy
Nurul Ashikin, Saleh (Universiti Malaysia Perlis (UniMAP), 2017-06)This project is focusing on the effect of zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy. The additional of micro-alloying have been developed by using casting technique with different percentage of zinc which ... -
Effects of recycled HDPE/PET blend compositions and compatibilizer employment on the mechanical and thermal
Nur Fatin Nisa, Abu Bakar (Universiti Malaysia Perlis (UniMAP), 2017-04)This study is focused on the improvement of mechanical properties of recycles high density polyethylene (rHDPE) and recycles polyethylene terephthalate (rPET) and investigates their thermal properties. The rHDPE/rPET with ... -
Effects of ultrasonication-assisted homogenization on morphology and properties of thermoplastic starch/cellulose biocomposites
Tan, Leong Ping (Universiti Malaysia Perlis (UniMAP), 2017)The thermoplastic starch/cellulose biocomposites were manufactured as green biocomposite films. TPS was produced through plasticization which the mixture of granule starch, water and glycerine went through the heating ... -
Fabrication of Al-based metallic glasses by mechanical alloying and hot consolidation
Ng, Chun Ming (Universiti Malaysia Perlis (UniMAP), 2017-04)This project is related to fabrication of aluminium based amorphous metallic glasses. Elemental powder of aluminium, copper and nickel were used for the purposed mentioned. The element powders with nominal composition ... -
The fabrication of heparin imprinted fiber membrane using electrospinning
Ahmad Shamir, Hasli (Universiti Malaysia Perlis (UniMAP), 2016-06)The studies of the fabrication of Heparin Imprinted Fiber membrane using Electrospinning was presented and investigated. This studies is about electrospinning method use to produce membrane from Polyvinylidene fluoride ... -
Lightweight material based on fly ash geopolymer
Yusra Saiyidah, Md Yusop (Universiti Malaysia Perlis (UniMAP), 2016-05)The utilization of fly ash in geopolymer concrete as an alternative to Ordinary Portland Cement partial replacement of cement gaining immerse importance today, mainly account of improvement in long term durability of ...