Now showing items 1081-1100 of 2200

    • Studying the incorporation of different additives to the fruit wrappers to increase shelf-life of local mangoes 

      Tan, Teik Swan (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      Mangoes are prone to develop postharvest spoilage during storage period. There are numerous factors contributing to spoilage such as temperature, humidity and fungal attack. In this research, chitin and CaCl2 had been ...
    • Development of new stator for AC induction motor 

      Nadhirah, Che Abdullah (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-05)
      The paper deals with the design guidelines for motor of three phase an AC Induction Motor. This project is focus on design the stator frame. The objective is to reduce the losses cause by heating inside the motor and in ...
    • Optimization of extraction conditions for antioxidant activity of crude bioactive phenolic from phanerochaete chrysosporium by liquid-state fermentation 

      Pravinnaath, Kuppusamy (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-05)
      Phanerochaete chrysosporium known as white rot fungus has the ability to degrade the abundant aromatic polymer lignin. In this study, the extractions for antioxidant activity of Phanerochaete chrysosporium biomass extract ...
    • Optimization of dye removal conditions using treated Banana peel based bioadsorbent 

      Shahrul Amin, Zawi (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      Dyes are one of the major water pollutant produced by many industries such as textile, printing, cosmetic and others. The highly toxic of this dye such as methylene blue can cause harmful to human and environment. This ...
    • Design and construct a simple DC motor 

      Ng, Kah Wai (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-05)
      The main objective of this project is to design and construct a simple dc motor. Basically, there have a seven main part of the dc motor, which is armature, commutator, carbon brush, armature winding, field magnet, shaft ...
    • Design stepdown voltage forward converter 

      Navajivanarao, Sathiaray (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-05)
      Nowadays, there are so many methods to step-down a voltage. This project is mainly based on software and hardware which contains a learning course on Power Electronic such as power converter, transformer and other equivalent ...
    • UniMAP navigation base on video system 

      Muhammad Qayyum, Mohamed Nor (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-05)
      Nowadays, people live and depend on technology to live their life. The modern era is all the equipment has been developed, including car navigation systems. Navigation is designed to point the way to a place more easily ...
    • Production of Hydroxyapatite (HAp) nanoparticles by sol-gel method 

      Surya Azreen, Kasim (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      Hydroxyapatite(HAp) nanoparticles is widely used in areas of orthopaedic and dental surgery because of its unique properties related to good biocompatibility, osteoconduction and excellent adsorption properties.Hydroxyapatite ...
    • Optimisation of Basic Red 46 removal using areca fiber 

      Siti Nurhafa Imra, Naqtahnain (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      The study on the biosorption of Basic Red 46 by areca fiber has been made to overcome the wastewater problem contaminated with dye. In this study, the areca fiber was used as biosorbent without any modification and treatment ...
    • Pyrolysis of empty fruit bunch in a fixed bed reactor and its kinetic study 

      Siti Shasha, Harun (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013)
      Empt fruit bunch (EFB) is a major waste from oil palm biomass after the extraction of oil. Pyrolyis will produce product such as bio-oil, bio-char and gas that can be generated through the thermal conversion of biomass. ...
    • Immobilization of glucose oxidase enzyme onto organic-inorganic sol-gels matrix on carbon paste electrode biosensor 

      Tan, Chee Kang (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      A hybrid sol-gel carbon nanotubes composite has been developed and used for surface covalent bonding of enzyme for biosensing application. The biosensor was developed by covalent immobilization of glucose oxidase enzyme ...
    • Fatty acid methyl ester production from low value vegetable oil via alkaline catalyst 

      Yeow, Seng Teong (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-05)
      Biodiesel was one of the most promising alternative renewable fuels to substitute the conventional fossil fuel. In this tropic, the production of biodiesel from low value waste vegetable oil (WVO) via alkaline catalyzed ...
    • Isolation and characterization of phosphate solubilizing bacteria isolated from tropical upland reforestation soil 

      Zulaikha, Mohamad Azam (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      Microorganisms of solubilizing phosphorus (P) pools in soils are considered essential in promoting P bioavailability. A study was conducted in laboratory to screen and isolate Phosphate solubilizing bacteria (PSB) taken ...
    • Development of protein extraction from agricultural waste as potential growth stimulator 

      Teoh, Seong Yee (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      Soybean waste obtained during processing of soy products was found to be rich in protein and adequate in supporting the growth of microorganisms such as fungus Rhizopus oligosporus. The objective of this study was to ...
    • Mass transport properties of Alginate Capsule 

      Zahidah, Mohammad Yusoff (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-05)
      The alginate and chitosan were used for the preparation of controlled release solute. There are no systematically studies conducted to understand the correlation and the influence of process parameter on the mass transport ...
    • Thermodynamic properties and phase behavior of biodiesel fuels derivatives for engine technology 

      Tang, Yi Jiang (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      This project, Thermodynamic Properties and Phase Behavior of Biodiesel Fuels Derivatives for Engine Technology, was mainly focusing on the study and development on the basis of modern theory, a simple and effective way ...
    • Development of Aqueous Two-Phase System (ATPS) to separate crude bioactive phenolics from phanerochaete chrysosporium biomass 

      Tan, Vin Chzee (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      Natural antioxidants demand has increased globally due to the advantages and effect in various aspects, especially in pharmaceutical industry. Fungus Phanerochaete chrysosporium presents crude bioactive phenolics which ...
    • Optimization of Protease Enzyme from Kesinai (Streblus asper) for Milk Coagulation 

      Seow, Yen Yi (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      Streblus asper (Kesinai) leaves contain proteases that can be used to coagulate milk. The enzyme was extracted by using phosphate buffer at pH 7.2 and the extracted enzyme activity was tested for protease assay. Response ...
    • Optimization of Jatropha Curcas oil extraction using microwave pretreatment prior to Soxhlet extraction 

      Sabee, Mohamed (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)
      Jatropha curcas is a multipurpose shrub with a variety of applications and enormous economic potentials for its seed oil, which can be converted into biodiesel. This study aims to demonstrate and compare the extraction ...
    • Two step pretreatment in enhancing rich-cellulose solid rice husk residues 

      Zahirah, Zakaria (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-05)
      In this project husk of rice was used to study about the optimization condition of pretreatment process in order to enhance high amount of cellulose. This project also was intended to study the effectiveness of the two ...