Final Year Project Papers & Reports: Recent submissions
Now showing items 1041-1060 of 2200
-
Measuring the temperature variation along the length of a triple concentric tube heat exchanger
(Universiti Malaysia Perlis (UniMAP)School of Mechatronic Engineering, 2009-04)A triple concentric tube heat exchanger of approximately 4m length is fabricated using stainless steel tubes of 2 inches (5.08cm), 3 inches (7.62cm) and 4 inches (10.16cm) diameter respectively. The three different fluids ... -
Experiment studies of cement mixture using waterfall stone at Batu Hampar Kedah
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-04)This project in its present form is the result of experimental studies using Batu Hampar waterfall stone to reduce the cost of cement manufacturing. The initial idea of this project was to determine the ability of Batu ... -
Optimization of protein determination using design of experiment methodology in earthworm (Eisenia foetida) powder
(Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2010-05)Proteins have long been considered very important nutrients; in fact the word ‘protein’ is derived from the Greek and means ‘holding first place’. The chemical compositions of the earthworm Eisenia foetida, its casts and ... -
All optical memory
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011)This project describes about all-optical memory comprises of three optical inputs with one modulated data signal at the transmission circuit and supports by another two control pulses circuits. These three inputs injected ... -
All-optical CSRZ generator
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2010-04)The Carrier-Suppressed Return-to-Zero (CSRZ) conversion signal is an optical modulation format used in high bit rate transmission system and long-haul data transmission. The characteristics of CSRZ provide a better ... -
K-Mean clustering simulation using C programming
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)At present, an analysis of the data or information is important in determining or divides into several clusters. Clustering method is one way how to analyze the static data that is used in various fields, including machine ... -
Simulation and design of 8-bit successive approximation analog-to-digital converter
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)An analog-to-digital converter (ADC) is a device that converts an analog unit to a digital unit in order to be used with a digital device. A Successive Approximation (SAR) ADC is an ADC that constantly comparing the input ... -
The properties of mortar strength containing palm oil clinker with difference mixing procedure
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)As a major manufacturer of palm oil in the world, one of the great challenges facing is the disposal of the waste product from the palm oil mill. These waste products will lead to environmental hazards that contribute to ... -
Stability assessment of man-made slope
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Study of slope stability is important for further purposed in construction and other infrastructure. Assessment stability on man-made slope is essential part because man-made slope exists all over the world. The objective ... -
Study on physical and geotechnical properties of Jana Manjung coal ash mixtures
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Most of coal-burning power plant produced residue by-product after burning process such as fly ash and bottom ash with approximate production ratio of 80% fly ash and 20% bottom ash. In the past, most of the coal burning ... -
Behavior of concrete with saw dust at fresh and hardened states
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Nowadays technology in concrete has been developing in many ways to enhance the quality and properties of concrete. For this project, saw dust is used in the making of concrete. This project is carried out to study the ... -
The role of rice husk ash (RHA) as cement replacement on the compressive strength of concrete
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)The use of pozzolanic material from waste product as partial cement replacement in concrete contribute to reduce the environmental, economic problem through their waste and as well enhance the strength and properties of ... -
Comparison between BS 8110: Part 1: 1997 and Eurocode 2 for design the reinforced concrete slab
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)In European countries, the use of codes of practice Eurocode 2 (EC 2) has been applied since 2004. However, in Malaysia, BS 8110 is still used for the design of the building. Thus, the code of practice is being implemented ... -
Comparison of classifying soils in Perlis between USCS and AASHTO standard
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Soil classification very important because of it can classify soil based on their characteristic. There are many type of soil classification has been used based on the engineering. Several example of soil classification ... -
Fundamental periods for medium-rise Reinforcement Concrete (RC) buildings
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)EC 2 standard and EC 8 standard as a parameter in determined the characteristic of fundamental period. From the research, the analyses were conducted based on the physical properties, and strength properties. The research ... -
Critical review on site conventional system: request for inspection (RFI) paper foam
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Request For Inspection (RFI) is form that very synonym in site construction. It is used in every single step of construction such as to construct basement of the building. This form will be used in 3 phase of the ... -
Masonry bond strength by using palm oil clinker with different aggregate replacement and different mixing procedure
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Mortar is very important thing in building composite because it is use to bind brick to become the wall. The wall is use to block anything that come from outside of the building to get into the inside of the building. ... -
Identification properties of concrete containing coconut shell as replacement of sand
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Nowadays, people are paying more attention on the sustainability in construction field. Therefore, the engineers are finding the ways to improve the quality of the concrete using recycle or waste product. One of the ... -
Behavioral study of concrete composite with mixture of fly ash and concrete sludge aggregate
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Nowadays, the high demand of cement and aggregate are an indication of development especially for the construction industry. Thus, the alternative to replace partial replacement of cement and aggregate are by using the ... -
Study on the different arrangement of brick masonry wall between three type of bricks
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)This project presents the result of brick masonry strength depends on different bonding follow by the type brick and to determine the crack pattern at the masonry wall. The arrangement was used in this research is stretcher ...