Browsing Final Year Project Papers & Reports by Title

Now showing items 1764-1783 of 2200

    • Sensitivity of adjustable speed drive to voltage sags and solution 

      Nur Atikah, Zainol (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-04)
      This project was discuss a about sensitivity of adjustable speed drive to voltage sags and solution. This project is presence the three phase (balance or symmetrical) and single phase ASD and the result from the experimental ...

    • Separation of acetic acid and water using reverse osmosis membranes 

      Boo, Chie Hang (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2016-06)
      This study focuses on utilizing the reverse osmosis membrane to separate the acetic acid from aqueous mixture. A commercially AG membrane and three laboratory synthesized polysulfone (PSU) membranes were used in this ...

    • Separation of Acetone Butanol Ethanol (ABE) mixture solvent using fractional distillation 

      Ahmad Syafiq, Mohd Azahari (Universiti Malaysia Perlis (UniMAP), 2017-06)
      Fractional distillation is the most common separation method used to separate and purify liquid sample. In this study, ABE mixture in the ratio of 3:6:1 combined with a volume of water undergo fractional distillation, ...

    • Serial Peripheral Interface (SPI) (Front End Design) 

      Mohd Noorkasyfi Md Shariff (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008)
      The Serial Peripheral Interface Bus or SPI bus is a synchronous serial data link. This device is one of ASIC design chip that have in the market. In this final year project the new form of device will be created from the ...

    • Serial Port communication 

      Hamdan, Hashim (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2008-03)
      The scope of this project is to study and understand the mechanism of serial port programming on LINUX platform. This initiation has been taken to further enhanced usage at open source software or in system development. ...

    • Serial stepper motor controller 

      Esmal Fhahmie, Abd Malek (Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2011-06)
      The theory of stepper motor control has evolved since the late 18th century. Simply, Stepper motor control is defined as accurately controlling the movement of an object based on speed, distance, load, inertia or a ...

    • The settlement analysis of shallow foundation on treated clay soil 

      Mohamad Shukry, Amiry (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      A study was conducted to understanding the aims and greater understanding of the research analysis on shallow foundation settlement on the treated clay. Clay is commonly found in areas near the beach. This project is to ...

    • Shape classification of Sunshine mango using machine vision 

      Nur Athirah, Mabasri (Universiti Malaysia Perlis (UniMAP), 2017-06)
      This thesis presents the application of machine vision to classify the shape regularity of sunshine mango. The algorithm were successfully developed and programmed for image processing and image acquisition and then the ...

    • Shape identification and measurement 

      Lily Malina Shoib (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2007-04)
      This final year project head for analysis and develop a Shape Identification and Measurement software system for images. This project started with the analysis on the pre-existence software systems that are related in the ...

    • Shape recognition on embedded system 

      Liew, Eng Keat (Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)
      Vision is the most advanced of human senses, so it is not surprise that images contribute important role in human perception. Shape recognition is an analogous to computer vision, which is an important field nowadays. ...

    • Shape recognition using image processing 

      Henry Hamdan (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2007-04)
      A Shape Recognition through Vision is a program that use for supporting industrial needs. A tracker will try to get an accurate shape for being understood by the machine. However, there are several ways to recognize the ...

    • Shear behaviour of intermittent profiled web girder using finite element method 

      Mohd Nurkhairie, Shaharuddin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      The finite element (FEM) is a numerical solution technique applicable to broad range of engineering and physics problem. This FEM addresses the difficulty by dividing the region into small sub-region and used as a basic ...

    • Shrinkage and warpage on front panel housing using Genetic Algorithm (GA) 

      Muhammad Ezuddin, Shafiee (Universiti Malaysia Perlis (UniMAP), 2016-06)
      In materials processing, quality and productivity are most important and must be controlled for each product type produced. In an injection moulding process, quality is measured in term of warpage of moulded parts while ...

    • Side lobe suppression of vivaldi antenna using shorting pin structure 

      Siti Nur Ainni, Dzaaba (Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)
      This project was executed in order to design side lobe suppression of Vivaldi antenna using shorting pin structure at S-band frequency. Nowadays, Vivaldi antenna has been used to satellite communications, remote sensing ...

    • Signal propagation analysis for point to multipoint communication (wireless propagation) 

      Muhamad Faris, Zaidul Bakri (Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)
      The ACE (Engineering Centre Communication) has established point to point/multipoint communication operating at 5.8 GHz as well as providing wifi swices at 2.4 GHz. In this thesis, signal strength of 2.4 GHz and 5.8 GHz ...

    • Signature verification and recognition by using support vector machine 

      Aida Nurfarhana, Saidin (Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)
      Signature is an important biometric of a person that is attribute of a human being which can be used to authenticate human identity. There are lots of biometric techniques that had been represented in the past. A biometric‟s ...

    • Silica extraction from agricultural waste as corrosion inhibitor 

      Nur Amni, Mohd Ezani (Universiti Malaysia Perlis (UniMAP), 2016-06)
      Rice husk and rice straw are found abundant as by-product of the the rice milling industry. Both of the agricultural wastes have a great potential to be used as raw material in industry. Rice husk and rice straw normally ...

    • Silver coated immobilized PANI/TiO₂ by using photo-oxidation method 

      Nurul Dasira, Ismail (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016)
      This study describes ability of silver coated immobilized PANI/TiO₂ by using photooxidation method in the waste water treatment through the photocatalytic degradation process. The polyaniline soluble is prepared by ...

    • Simulate MIMO channel capacity 

      Mohd Aimaduddin, Mohd Ariffin (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2008-04)
      MIMO is defined as Multiple Input Multiple Output systems have multiple antennas at both links at transmitter and receiver. Based on the research that has been done for this project, MIMO system has the capability to ...

    • Simulating of Voltage Sag caused by fault in power system 

      Mohd Khalid Mat Noh (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2008-03)
      The voltage sag phenomenon is the most severe power quality problem that exists today. Electrical engineers have placed the issue of power quality studies on high priority due to the economic loss resulting from voltage ...