Now showing items 1-20 of 2200

    • 11 kVA Substation design and commissioning 

      Md. Rezuwan Ahmad (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2008-05)
      This report will explain about the final year project title as “ Designing and Commisioning the 11kV Electrical Substation”. In the part of designing this electrical substation, it need to localize and installation a several ...
    • 16-Bits Carry Look-Ahead Adder as a High Speed Adder 

      Normala Muhd. Hussain (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      This paper put emphasis on designing a modified carry look-ahead adder (CLA) to acquire a high speed carry look ahead in seeing as speed is the significant characteristics to a Central Processor Unit. After some historical ...
    • 16-Bits High Speed Carry Select Adder 

      Nur Syuhada Muhammad Khariri (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      This report presents the design, performance evaluation of two design of 16-bit carry select adder. The layout for the high speed 16-bits carry-select adder was present in this report. The comparison of both designs is to ...
    • 2.4 GHz QPSK demodulator using MATLAB 

      Azhar Rahmat (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2008-04)
      In everyday lives, technologies are increasing exponentially. It is means that communications are more reliable to make people life easier. It is true when communication abilities are not only surrounded by wires; but ...
    • 2.4 Ghz QPSK modulation using MATLAB 

      Farihah Salleh @ Hashim (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2008-04)
      Nowadays when electronics becomes advances in technology, a world become smaller and more easily accessible for the sharing of knowledge and information. Electronic parts are more expected to make our lives easier by showing ...
    • 3-D frequency selective surface 

      Nor Hamizah, Mohd Tajudin (Universiti Malaysia Perlis (UniMAP), 2015-06)
      Frequency Selective Surfaces (FSSs) are planar intermittent structures of identical cells that behave like channels to electromagnetic vitality. FSSs are widely used for protecting of non-ionizing radiation. They have been ...
    • 3-Input controller unit using Radio Frequency(RF) technology 

      Chin Hui Yen (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2008-03)
      One microcontroller 8051 board, one RF transmitter, one RF receive and three servo motors are used in this project. RF signal is used as the medium connection between the RF transmitter and the RF receiver. Digital signals ...
    • 3D frequency selective surface with close band response 

      Muhammad Fakhrul Amir, Mohd Fadil (Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)
      The interest in producing frequency selective surface that can sustain the highly selective of frequency demands is getting popular nowadays. Applications such as simultaneous worldwide communication with different ...
    • 3D geometry model construction and manipulation using OpenGL 

      Abdul Hakim, Azir (Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)
      3d Geometry model construction and manipulation were applied to create a 3D educational game. Equations are included to test 7-8 year old students of their understanding in Mathematics with scores for each answer they ...
    • 3D miniature antenna 

      Syaiful Anas, Suhaimi (Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)
      Antennas have permeated into many aspects of our daily lives, and have enabled several advances especially in communication system. A wide variety of antennas have been utilized for an array application, including monopole ...
    • 7-input honeycomb sensor by using FPGA application 

      Lem Biing Lin (Universiti Malaysia PerlisSchool of Computer and Communication Engineering, 2008-04)
      This project is to design a set of light sensors to measure the light intensity and display the sensor that has the highest intensity by using LCD. These light sensors (7 light sensors) are mounted in a honeycomb and each ...
    • 8-bits X 8-bits modified Booth 1’s complement multiplier 

      Norafiza Salehan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      With advances in technology, many researchers have tried and are trying to design multipliers which offers either of following – high speed, low power consumption, regularity of layout and hence less area or even combination ...
    • Aantibacteria and wound healing activities of Elephantopus scaber plant 

      Muhamad Ikram, Jamaludin (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2016-06)
      In this era, researchers have discovered that the plant based drug has ability to treat many ailment and diseases. The new pharmaceuticals development from the plants based drug has gained a great attention in worldwide. ...
    • AC load flow calculation of power system 

      Wan Kit Peng (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-05)
      This final year project presents the AC load flow calculation of power system by using the Delphi 7 as the development tool to develop the project. Delphi is a completely a new program with new graphical user interface ...
    • AC motor braking with dynamic 

      Dilla, Abd. Majid (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-04)
      This AC motor braking with dynamic is about the motor to stop or more known with brake. Usually inside motor industry, need motor stop or brake instantly. To generate this system, has been divided into three stages. First ...
    • Acclimatization and performance study of palm oil mill effluent (POME) in closed anaerobic reactor 

      Lim, Kok Keat (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)
      Anaerobic reactor system is particularly effective to reduce pollutant of the high strength wastewater and produces the biogas. POME wastewater considered as polluting contaminants due to its high organic load was treated ...
    • Active antenna amplifier (Antenna design) 

      Nur Syazwani, Mohd Nasir (Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)
      This thesis present the design of active antenna amplifier that can operate at frequency of 5.8 GHz. The proposed antenna is consist of 4x1 rectangular array antenna which is fed by class E power amplifier. Power amplifier ...
    • Adaptive beam microstrip patch transceiver using artificial switch for radar application 

      Azim Haikal, Zianal (Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)
      This project is to design a single circular-sized patch antenna which can operate in the range from 2.4 GHz to 2.5 GHz frequency. Since nowadays, RADAR antenna usually developed with a mechanical system, there still face ...
    • The additive for cement and its properties 

      Mohd Hanafi, Roslan (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This research was carried out to establish the properties and strength behaviour of concrete using additive using mix design concrete and constant water-cement ratio. The main objective of this study is to find the strength ...
    • Adjustable speed drives susceptibility to voltage sag 

      Mohd Hasrul Mohd Kamaruzzaman (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2008-05)
      Voltage sags are probably the most important power quality problems affecting industrial and large commercial customers. These events are usually associated with a fault somewhere on the supplying power system. The ...