Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/35018
Title: Effect of adhesive thickness on adhesively bonded T-joint
Authors: A. R., Abdullah
Mohd Afendi, Rojan, Dr.
Mohd Shukry, Abdul Majid, Dr.
abdullah_rm@petronas.com.my
afendirojan@unimap.edu.my
shukry@unimap.edu.my
Keywords: Adhesive thickness
Adhesively bonded
Fertilizer industry
SUS 304 stainless steel
Tensile loads
Issue Date: 2013
Publisher: IOP Publishing Ltd
Citation: IOP Conference Series: Materials Science and Engineering, vol. 50(1), 2013, pages 1-6
Abstract: The aim of this work is to analyze the effect of adhesive thickness on tensile strength of adhesively bonded stainless steel T-joint. Specimens were made from SUS 304 Stainless Steel plate and SUS 304 Stainless Steel perforated plate. Four T-joint specimens with different adhesive thicknesses (0.5, 1.0, 1.5 and 2.0 mm) were made. Experiment result shows T-joint specimen with adhesive thickness of 1.0 mm yield highest maximum load. Identical T-joint specimen jointed by spot welding was also tested. Tensile test shows welded T-Joint had eight times higher tensile load than adhesively bonded T-joint. However, in low pressure application such as urea granulator chamber, high tensile strength is not mandatory. This work is useful for designer in fertilizer industry and others who are searching for alternative to spot welding.
Description: Link to publisher's homepage at http://iopscience.iop.org/
URI: http://iopscience.iop.org/1757-899X/50/1/012063
http://dspace.unimap.edu.my:80/dspace/handle/123456789/35018
ISSN: 1757-8981 (Print)
1757-899X (Online)
Appears in Collections:Mohd Afendi Bin Rojan, Associated Professor Dr.
Mohd Shukry Abdul Majid, Assoc. Prof. Ir. Dr.

Files in This Item:
File Description SizeFormat 
Effect of adhesive thickness on adhesively bonded T-joint.pdf714.39 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.