Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/34559
Title: Effect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sintering
Authors: Shamsul, Baharin Jamaludin, Prof. Dr.
Mazlee, Mohd Noor, Dr.
Rahman, W
sbaharin@unimap.edu.my
mazlee@unimap.edu.my
Keywords: Hardness
Heating rate
Microwave sintering
Porosity
Relative density
Issue Date: 2013
Publisher: Praise Worthy Prize
Citation: International Review of Mechanical Engineering, vol. 7(1), 2013, pages134-139
Abstract: The application of microwave sintering to metallic materials offers better mechanical properties over conventional sintering method. In this paper, the effect of heating rate on the microstructure and properties of the sintered 84Fe-11Cr-5Al2O3 composite was investigated. Sintering was carried out in a tubular microwave furnace HAMiLab-V3 under N2 atmosphere. The heating rates were selected between 10°C/min to 60°C/min with increment of 10°C/min. A study of microstructure and physical properties was carried out on sintered samples. The results showed that the optimum heating rate was 20°C/minute. It was observed that, relative density, porosity and hardness decreased as heating rate higher than 20°C/minute.
Description: Link to publisher's homepage at http://connection.ebscohost.com/
URI: http://pdc-connection.ebscohost.com/c/articles/87631516/effect-heating-rate-microstructure-properties-iron-chromium-reinforced-alumina-particle-produced-via-microwave-sintering
http://dspace.unimap.edu.my:80/dspace/handle/123456789/34559
ISSN: 1970-8734
Appears in Collections:Mazlee Mohd Noor, Assoc. Prof. Dr.
Shamsul Baharin Jamaludin, Prof. Dr.

Files in This Item:
File Description SizeFormat 
Effect of heating rate on microstructure and properties of the abst (2).pdf49.16 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.