1. UniMAP Library Digital Repository
  2. Researchers
  3. Shamsul Baharin Jamaludin, Prof. Dr.
Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/34559
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShamsul, Baharin Jamaludin, Prof. Dr.-
dc.contributor.authorMazlee, Mohd Noor, Dr.-
dc.contributor.authorRahman, W-
dc.date.accessioned2014-05-21T02:09:40Z-
dc.date.available2014-05-21T02:09:40Z-
dc.date.issued2013-
dc.identifier.citationInternational Review of Mechanical Engineering, vol. 7(1), 2013, pages134-139en_US
dc.identifier.issn1970-8734-
dc.identifier.urihttp://pdc-connection.ebscohost.com/c/articles/87631516/effect-heating-rate-microstructure-properties-iron-chromium-reinforced-alumina-particle-produced-via-microwave-sintering-
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/34559-
dc.descriptionLink to publisher's homepage at http://connection.ebscohost.com/en_US
dc.description.abstractThe application of microwave sintering to metallic materials offers better mechanical properties over conventional sintering method. In this paper, the effect of heating rate on the microstructure and properties of the sintered 84Fe-11Cr-5Al2O3 composite was investigated. Sintering was carried out in a tubular microwave furnace HAMiLab-V3 under N2 atmosphere. The heating rates were selected between 10°C/min to 60°C/min with increment of 10°C/min. A study of microstructure and physical properties was carried out on sintered samples. The results showed that the optimum heating rate was 20°C/minute. It was observed that, relative density, porosity and hardness decreased as heating rate higher than 20°C/minute.en_US
dc.language.isoenen_US
dc.publisherPraise Worthy Prizeen_US
dc.subjectHardnessen_US
dc.subjectHeating rateen_US
dc.subjectMicrowave sinteringen_US
dc.subjectPorosityen_US
dc.subjectRelative densityen_US
dc.titleEffect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sinteringen_US
dc.typeArticleen_US
dc.contributor.urlsbaharin@unimap.edu.myen_US
dc.contributor.urlmazlee@unimap.edu.myen_US
Appears in Collections:Mazlee Mohd Noor, Assoc. Prof. Dr.
Shamsul Baharin Jamaludin, Prof. Dr.

Files in This Item:
File Description SizeFormat 
Effect of heating rate on microstructure and properties of the abst (2).pdf49.16 kBAdobe PDFView/Open
Show simple item record


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.