| Issue Date | Title | Author(s) |
| Jul-2019 | Advanced glass reinforced epoxy filled fly ash based geopolymer filler: preparation and characterization on piping materials | Mohammad Firdaus, Abu Hashim; Mohd Mustafa Al Bakri, Abdullah; Sandu, A. V.; Puskas, A.; Yusrina, Mat Daud; Farah Farhana, Zainal; M. A. Faris; Hasri; Hartati; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; Faculty of Civil Engineering, Technical University of Cluj-Napoca; Fakultas Matematika & Ilmu Pengetahuan Alam, Universitas Negeri Makassar; firdaushashim@unimap.edu.my |
| Dec-2020 | Characterisation at the bonding zone between fly ash based geopolymer repair materials (GRM) and ordinary portland cement concrete (OPCC) | Warid Wazien, Ahmad Zailani; Mohd Mustafa Al Bakri, Abdullah; Mohd Fadzil, Arshad; Rafiza, Abd Razak; Muhammad Faheem, Mohd Tahir; Remy Rozainy, Mohd Arif Zainol; Nabiałek, Marcin; Sandu, Andrei Victor; Wysłocki, Jerzy J.; Błoch, Katarzyna; Faculty of Civil Engineering, Universiti Teknologi MARA (UiTM); Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis (UniMAP); School of Civil Engineering, Universiti Sains Malaysia (USM); Department of Physics, Częstochowa University of Technology; Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; warid.wazien92@yahoo.com; mustafa_albakri@unimap.edu.my |
| Jun-2018 | Characteristics of thermoplastic potato starch/bentonite nanocomposite film | Nurul Husna, Zakaria; Noorhafiza, Muhammad; Mohd Mustafa Al Bakri, Abdullah; Sandu, I. G.; Mei Wan, C. L.; School of Manufacturing Engineering, Universiti Malaysia Perlis (UniMAP); Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; nurulhusna.zakaria@gmail.com; noorhafiza@unimap.edu.my; mustafa_albakri@unimap.edu.my |
| Jun-2018 | Durability of fly ash based geopolymer concrete infilled with rubber crumb in seawater exposure | Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; S. N. H. Ramli; Minciuna, M. G.; Rafiza, Abd Razak; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; zarinayahya@unimap.edu.my |
| Jun-2018 | Effect of solid to liquid ratio on heavy metal removal by geopolymer-based adsorbent | Nurliyana, Ariffin; Mohd Mustafa Al Bakri, Abdullah; Mohd Remy Rozainy, Mohd Arif Zainol; Baltatu, M. S.; Liyana, Jamaludin; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); School of Civil Engineering, Universiti Sains Malaysia (USM); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; nurliyana.arifin@gmail.com; mustafa_albakri@unimap.edu.my |
| Feb-2020 | Effect of solid-to-liquid ratio on thin fly ash geopolymer | Yong-Sing, Ng; Yun-Ming, Liew; Mohd Mustafa Al Bakri, Abdullah; Hui-Teng, Ng; Kamarudin, Hussin; Cheng Yong, Heah; Nurul Aida, Mohd Mortar; Sandu, Andrei Victor; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; ymliew@unimap.edu.my |
| Jul-2019 | Extraction of nitrogen, phosphorus and potassium from food waste under elevated temperature by heat induced bath method | Mohamad Anuar, Kamaruddin; N. F., Ahmad; Sandu, I. G.; Alrozi, R.; Sandu, I.; Mohd Mustafa Al Bakri, Abdullah; School of Industrial Technology, Universiti Sains Malaysia (USM); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Chemical Engineering, Universiti Teknologi MARA (UiTM); Center Alexandru Ioan Cuza University of Iasi; anuarkamaruddin@usm.my |
| Jun-2018 | Influence of kaolin in fly ash based geopolymer concrete: destructive and non-destructive testing | Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; N. Mohd Ramli; Burduhos-Nergis, D. D.; Rafiza, Abd Razak; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Department of Civil Engineering Technology, Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; zarinayahya@unimap.edu.my |
| Aug-2019 | Influence of solid-to-liquid ratio on properties of fly ash geopolymer ceramics | Romisuhani, Ahmad; Mohd Mustafa Al Bakri, Abdullah; Wan Mastura, Wan Ibrahim; Sandu, Andrei Victor; Warid Wazien, Ahmad Zailani; Sharun Nizam, Shahrun Nahar; Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; romisuhani@unimap.edu.my |
| Jun-2018 | Magnetic properties of rapid cooled FeCoB based alloys produced by injection molding | Nabiałek, M.; Jeż, B.; Jeż, K.; Pietrusiewicz, P.; Gruszka, K.; Bloch, K.; Gondro, J.; Rzącki, J.; Mohd Mustafa Al Bakri, Abdullah; Sandu, A. V.; Szota, M.; Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology; Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); nmarcell@wp.pl |
| Jul-2019 | Optimization of processing parameters for graphitization of oil palm trunk waste at lower heating temperature | N. A., Karim; Che Mohd Ruzaidi, Ghazali; M. M., Ramli; Sandu, A. V.; Chirila, E.; Mohd Mustafa Al Bakri, Abdullah; Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); School of Microelectronic Engineering, Universiti Malaysia Perlis (UniMAP); School of Fundamental Science, Universiti Malaysia Terengganu (UMT); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; izahkarim87@gmail.com |
| Feb-2021 | Performance of Sn-3.0Ag-0.5Cu composite solder with kaolin geopolymer ceramic reinforcement on microstructure and mechanical properties under isothermal ageing | Nur Syahirah, Mohamad Zaimi; Mohd Arif Anuar, Mohd Salleh; Sandu, Andrei Victor; Mohd Mustafa Al Bakri, Abdullah; Norainiza, Saud; Shayfull Zamree, Abd Rahim; Vizureanu, Petrica; Rita, Mohd Said; Mohd Izrul, Izwan Ramli; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis (UniMAP); arifanuar@unimap.edu.my; sav@tuiasi.ro; peviz@tuiasi.ro |
| Jun-2018 | Preparation of heat treated Titanium Dioxide (TiO₂ ) nanoparticles for water purification | Araoyinbo, A. O.; Mohd Mustafa Al Bakri, Abdullah; Azmi, Rahmat; A. I., Azmi; Vizureanu, P.; Wan Mohd Faizal, Wan Abd Rahim; Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; alaba@unimap.edu.my |
| Jul-2019 | Process of magnetizing bulk amorphous alloys Fe₄₃₊ₓCo₂₉-ₓY₈B₂₀ (x= 0 or 5) | Nabialek, M.; Jeż, B.; Jeż, K.; Pietrusiewicz, P.; Błoch, K.; Gondro, J.; Mohd Mustafa Al Bakri, Abdullah; Sandu, A. V.; Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology; Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); bartek199.91@o2.pl |
| Feb-2021 | Properties of a New Insulation Material Glass Bubble in Geopolymer Concrete | Noor Fifinatasha, Shahedan; Mohd Mustafa Al Bakri, Abdullah; Norsuria, Mahmed; Kusbiantoro, Andri; Tammas-Williams, Sam; Li, Long-Yuan; Ikmal Hakem, Aziz; Vizureanu, Petrica; Wysłocki, Jerzy J.; Bloch, Katarzyna; Nabiałek, Marcin; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Engineering Technology, Universiti Tun Hussein Onn (UTHM); Faculty of Engineering and Technology, Liverpool John Moores University; School of Marine Science and Engineering, University of Plymouth; Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; Department of Physics, Częstochowa University of Technology; mustafa_albakri@unimap.edu.my; nmarcell@wp.pl |
| Jun-2017 | Study on fired clay bricks by replacing clay with palm oil waste: effects on physical and mechanical properties | Aeslina, Abdul Kadir; Noor Amira, Sarani; Mohd Mustafa Al Bakri, Abdullah; Perju, M C; Sandu, Andrei Victor; Department of Water and Environmental Engineering, Faculty of Civil and Environmental Engineering (UTHM); Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; aeslina@uthm.edu.my; nramira1987@gmail.com |
| Feb-2020 | Synthesis and characterization of fly ash based geopolymer ceramics: effect of NaOH concentration | Romisuhani, Ahmad; Wan Mastura, Wan Ibrahim; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Nurul Aida, Mohd Mortar; Noratikah, Hashim; Warid Wazien, Ahmad Zailani; Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; Faculty of Civil Engineering, Universiti Teknologi MARA (UiTM); romisuhani@unimap.edu.my |
| Jun-2017 | Synthesis and characterization of TiO₂/SiO₂ thin film via SolGel method | Dewi Suriyani, Che Halin; Mohd Mustafa Al Bakri, Abdullah; Norsuria, Mahmed; S N A, Abdul Malek; Vizureanu, P; Ayu Wazira, Azhari; Center of Excellence Geopolymer & Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis, (UniMAP); Faculty of Engineering Technology, Universiti Malaysia Perlis, (UniMAP); School of Environmental Engineering, Universiti Malaysia Perlis, (UniMAP); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; dewisuriyani@unimap.edu.my |
| Jun-2017 | Use of incineration solid waste bottom ash as cement mixture in cement production | Jun, N H; Mohd Mustafa Al Bakri, Abdullah; Jin, T S; Aeslina, Abdul Kadir; Sandu, Andrei Victor; Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP); Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP); Department of Water and Environmental Engineering, Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia (UTHM); Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi; hooi.jun.ng88@gmail.com; mustafa_albakri.unimap.edu.my; sjtan@unimap.edu.my |
