dc.contributor.author | Hussain, Zuhailawati | |
dc.contributor.author | Alaa Muhsin, Saeed | |
dc.contributor.author | Ahmad Badri, Ismail | |
dc.contributor.author | Tadashi, Ariga | |
dc.date.accessioned | 2010-01-21T04:45:54Z | |
dc.date.available | 2010-01-21T04:45:54Z | |
dc.date.issued | 2009-12-01 | |
dc.identifier.citation | p1-4 | en_US |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/7539 | |
dc.description | Organized by School of Materials Engineering & Sustainable Engineering Research Cluster, 1st - 2nd December 2009 at Putra Brasmana Hotel, Kuala Perlis, Perlis. | en_US |
dc.description.abstract | The shear strength and microstructural characteristics of titanium-nickel joints joined by spot brazing technique was investigated in this work. The spot brazing process was performed with and without addition of 71Ag-28Cu-1Mg filler alloy at the interfacial region of titanium and nickel. The spot brazing was done with a current in a range of 1.0 kA to 4.0 kA with current interval of 0.5 kA. Welding voltage was kept at 2 V, electrode force was kept at 3.0 kgf / cm2 and welding time of 50 ms was used. The strength of the joints was assessed using a shear test mode and the microstructure was studied using optical microscope, scanning electron microscope and energy dispersive spectroscopy. The strength of Ti/Ag alloy/Ni joints is higher than that of Ti/Ni joints when welding current was in the range of 2.0 kA to 4.0 kA had been applied due to the elimination of void and enlargement of weld nugget. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis | en_US |
dc.relation.ispartofseries | Proceedings of the Malaysian Metallurgical Conference '09 (MMC'09) | en_US |
dc.subject | Spot welding | en_US |
dc.subject | Brazing | en_US |
dc.subject | Microstructure | en_US |
dc.subject | Strength | en_US |
dc.subject | Titanium-nickel joints | en_US |
dc.subject | Steel, High strength -- Welding | en_US |
dc.subject | Shear (Mechanics) | en_US |
dc.subject | Spot brazing | en_US |
dc.title | The influence of 71Ag-28Cu-1Mg filler alloy on microstructure and properties of spot brazed Titanium/Nickel joint | en_US |
dc.type | Working Paper | en_US |
dc.contributor.url | zuhaila@eng.usm.my | en_US |