| dc.contributor.author | Fauziah, Mat | |
| dc.contributor.author | Zulkifli, M.J. | |
| dc.contributor.author | Othman I., M. N | |
| dc.contributor.author | Md Noor Arib, Md Rejab | |
| dc.date.accessioned | 2009-11-09T06:40:21Z | |
| dc.date.available | 2009-11-09T06:40:21Z | |
| dc.date.issued | 2009-10-11 | |
| dc.identifier.citation | p.9C 1 - 9C 3 | en_US |
| dc.identifier.isbn | 978-967-5415-07-4 | |
| dc.identifier.uri | http://dspace.unimap.edu.my/123456789/7229 | |
| dc.description | Organized by School of Mechatronic Engineering (UniMAP) & co-organized by The Institution of Engineering Malaysia (IEM), 11th - 13th October 2009 at Batu Feringhi, Penang, Malaysia. | en_US |
| dc.description.abstract | This paper presents a study of modal analysis
using vibration technique of mild steel and aluminium. The measurement of the modal frequencies is based on frequency response function (FRF). The relationship between the natural frequencies extracted from
vibration data and the mechanical properties of material is identified. LMS Test Xpress and impact hammer were utilized as the acquisition system. The result obtained
successfully shows the correlation between the vibration signal captured and the mechanical properties of material. Therefore, a system with a capability in
predicting and estimating the mechanical properties of material is possible to be developed in future works. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Universiti Malaysia Perlis | en_US |
| dc.relation.ispartofseries | Proceedings of International Conference on Applications and Design in Mechanical Engineering 2009 (iCADME 2009) | en_US |
| dc.subject | Vibration | en_US |
| dc.subject | Modal analysis | en_US |
| dc.subject | Steel | en_US |
| dc.subject | Mild steel | en_US |
| dc.subject | Aluminium | en_US |
| dc.title | A study of Modal analysis to determine the mechanical properties of materials | en_US |
| dc.type | Working Paper | en_US |
