Search
Now showing items 1-10 of 10
Warpage analyses on thin plate in three-plate mold by Taguchi method and analysis of variance (ANOVA) for PC, ABS and PC/ABS
(Praise Worthy Prize S.r.l., 2012)
Warpage is a common issue in plastic injection molding process. It can get worse for thin parts and therefore it is more challenging for product design engineers, mold designers and manufacturing engineer to cope with ...
The influence of different mold temperature on warpage in a thin shallow injection molding process
(Praise Worthy Prize S.r.l., 2012)
Every injection molding parameter have its own influence towards the quality of an injection-molded part. Temperature, pressure and time are main parameters that typically highlighted in controlling the warpage defect of ...
Optimization on parameter settings in determining warpage factors of a side-gated thin shallow part injection molding for PP, ABS & PC+ABS materials
(Praise Worthy Prize S.r.l., 2012-05)
The injection molding process of thin shallow part requires several concerns in order to produce a quality output. In part of determining the best parameter settings, among other considerations that need to be taken are ...
Warpage analysis with straight drilled and conformal cooling channels on front panel housing by using taguchi method
(Trans Tech Publications, 2014)
The challenging in injection molding process is to get the uniform thermal distribution on the molded parts during the cooling stage which is mainly depend on the design of the cooling channels in injection mold. Poor ...
Comparison between single and multi gates for minimization of warpage using taguchi method in injection molding process for ABS material
(Trans Tech Publications, 2013-12)
In this study, a mold is designed in single and dual type of gate in order to investigate the deflection of warpage for thick component in injection molding process. Autodesk Moldflow Insight software was used as a medium ...
Fire alarm system, portable fire extinguisher and hose real system maintenances for safety purpose and requirements
(Universiti Malaysia Perlis (UniMAP), 2009-12-01)
Fire Fighting system or equipments are important elements in building safety measures in order to ensure people’s safety when fire occurs. The Fire Alarm Systems
deserves the highest level of care and maintenance achievable. ...
The effect of inoculation on properties of modified ductile Ni-resist alloy
(Trans Tech Publications, 2014)
In this study, ductile Ni-resist alloy with a minimum 18 wt. % nickel composition was modified. Up to 12 wt. % manganese was added together with 10 wt. % nickel before undergoing the inoculation process at various percentages ...
Strength of the weld line and warpage defects on the molded parts in injection molding process
(Praise Worthy Prize S.r.l., 2013)
Strength at weld the line location and warpage problem in injection molding plastic component were not new problems in injection molding industries. Many researchers had emerged with several improvement techniques to reduce ...
Warpage Optimisation on the Moulded Part with Conformal Cooling Channels using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO)
(EDP Sciences, 2017)
Today, there are many of optimisation method have been explored by previous researchers to find the appropriate processing parameters setting for the injection moulding process. From the previous researches, it has been ...
Warpage Optimisation on the Moulded Part using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO)
(EDP Sciences, 2017)
Nowadays, there are various of optimisation methods that have been explored by many researchers to find the appropriate processing parameters setting for the injection moulding process. From the previous researches, it was ...