Show simple item record

dc.contributor.authorMohd Fathullah, Ghazli@Ghazali
dc.contributor.authorShayfull Zamree, Abd Rahim
dc.contributor.authorNorshah Afizi, Shuaib
dc.contributor.authorMohd Nasir, Mat Saad
dc.contributor.authorMuhamad Saifuldin, Abdul Manan
dc.date.accessioned2016-10-24T04:06:59Z
dc.date.available2016-10-24T04:06:59Z
dc.date.issued2011-11
dc.identifier.citationInternational Review of Mechanical Engineering, vol.5 (7), 2011, pages 1295-1301en_US
dc.identifier.issn1970-8734
dc.identifier.urihttp://www.praiseworthyprize.org
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/43791
dc.descriptionLink to publisher's homepage at http://www.praiseworthyprize.orgen_US
dc.description.abstractThin shallow plastic parts are widely produced using injection molding processes in producing varieties of components and applications. Warpage issue always happens in manufacturing thin shallow parts due to its uneven shape of the parts and also due to lack of knowledge in selecting the best injection molding parameters to produce with minimal warpage. Due to uncertainty of selecting the best parameters in reducing warpage issue, hence this study is performed purposely to determine the best parameters to be selected in manufacturing thin-shallow parts. Three types of polymer materials are selected for experimentations and the results are obtained using Taguchi Method and Analysis of Variance (ANOVA) and run through simulation software. All parameters are then compared with each other in recommending molding designers which is the best to be applied at mold design stage. Results from this research recommend polypropylene as the best parameter in order to obtain the minimal warpage of thinshallow parts.en_US
dc.language.isoenen_US
dc.publisherPraise Worthy Prizeen_US
dc.subjectANOVAen_US
dc.subjectInjection moldingen_US
dc.subjectTaguchi methoden_US
dc.subjectThin-shallow partsen_US
dc.subjectWarpageen_US
dc.titleOptimal process conditions of warpage with thin-shallow features molded with pin-point gating systemen_US
dc.typeArticleen_US
dc.contributor.urlshayfull@unimap.edu.myen_US
dc.contributor.urlnorshahafizi@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record