Show simple item record

dc.contributor.authorShamsul Baharin, Jamaludin
dc.contributor.authorAhmad Azid Tahar, Ahmad Latiffi
dc.contributor.authorKhairel Rafezi, Ahmad
dc.contributor.authorMd Fazlul, Bari
dc.date.accessioned2009-01-28T06:52:23Z
dc.date.available2009-01-28T06:52:23Z
dc.date.issued2008-12-03
dc.identifier.citationp.33-38en_US
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/4258
dc.descriptionOrganized by Universiti Kebangsaan Malaysia (UKM), 3rd - 4th December 2008 at Danau Golf Club, Bangi, Selangor.en_US
dc.description.abstractIn the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the salt spray test, produced a whole rusty surface on the tested specimens (batch 2). The welding joints were subjected to tensile-shearing test in order to determine the strength of the welded joints from ambient and in corrosive environment. Tensile-shear test showed significant differences on the failure load between these two batches where corrosion had affected the surface strength of the welded steel. The results also showed that the highest tensile shear strength is given by the specimen welded using 4kA current at 4 cycles.en_US
dc.language.isoenen_US
dc.publisherUniversiti Kebangsaan Malaysia (UKM)en_US
dc.relation.ispartofseriesMalaysian Metallurgical Conference (MMC 2008)en_US
dc.subjectMild Steelen_US
dc.subjectSpot Weldingen_US
dc.subjectMicrostructuralen_US
dc.subjectTensile Shear Testen_US
dc.subjectResistance spot weldingen_US
dc.subjectWelded jointsen_US
dc.subjectSheet-steel -- Weldingen_US
dc.subjectStrength of materials -- Testingen_US
dc.titleThe influence of welding parameters and corrosive environment on the joint strengh of resistance Spotwelded Mild Steel Sheetsen_US
dc.typeWorking Paperen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record