| dc.description.abstract | Palm oil clinker (POC) is one of the waste material with a low cost that can found
in the palm oil industry. POC has potential as a fine aggregate to replace the sand to
produce mortar. This thesis was discusses about the impact of POC as a replacement
material in a mortar mixture. POC will act as a substitute for sand in the production of
mortar with water cement ratio variations diversity. The different of water cement ratio
was used in this experiment to get the best result for compressive strength test. There was
four different parameter to test the impact of the water cement ratio in the strength of
mortar and the parameter is 0.5 , 0.55 , 0.6 , 0.65. Every type of parameter was test by
using the different percentage replacement of POC. The percentage replacement of POC
is 0%, 25%, 50%, 75%, 100%. The different percentage of POC with different variation
of water cement content will produce different result of compressive strength. This thesis
showed that the different percentage of POC with variation of water cement ratio can be
used in the construction industry, especially for wall brick work and wall plastering work.
The result was show that the POC can be used as a lightweight mortar and concrete. | en_US |
