Browsing Mohammad Nuzaihan Md Nor, Associate Professor Dr. by Author "Mohammad Nuzaihan, Md Nor"

Now showing items 1-12 of 12

    • The alignment of single SWNTs between electrode using dielectrophoresis 

      Low, Foo Wah; Nur Hamidah, Abdul Halim; Uda, Hashim, Prof. Dr.; Mohammad Nuzaihan, Md Nor (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      This paper presents the development and fabrication of electrical devices based on alignment of carbon nanotubes (CNTs) in single bundle of single-walled carbon nanotubes (sb-SWNTs) using dielectrophoresis (DEP). The Silicon ...

    • Application of e-beam lithography for nanowire development 

      S. Fatimah, Abd Rahman; Uda, Hashim, Prof. Dr.; Mohammad Nuzaihan, Md Nor (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Miniaturization and performance improvements are driving the electronics industry to shrink the feature size of semiconductor device. Because of its diffraction limit, conventional photolithography is becoming increasingly ...

    • Carbon nanotubes : Design and fabrication for biosensor applications 

      Azniza, Abas; Mohammad Nuzaihan, Md Nor; Mohd Asyraf, Mohd Zulkifli (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      Carbon nanotubes or known as CNTs are allotropes of carbon with a cylindrical nanostructure. They exhibit extraordinary strength and unique electrical properties, and are efficient thermal conductors [1]. In particular, ...

    • Cost Effective Negative Plenum Cleanroom for Microelectronic Engineering undergraduate 

      Uda, Hashim; Zul Azhar, Zahid Jamal; Mohammad Nuzaihan, Md Nor; Nur Hamidah, Abdul Halim (Kolej Universiti Kejuruteraan Utara Malaysia, 2005)
      The Negative Plenum Cleanroom which is design and built by KUKUM is primarily used for the teaching of the undergraduate microelectronic course. The cleanroom is approximately 115m² in size. The level of cleanliness in the ...

    • Design and fabrication of silicon nanowire based sensor 

      Siti Fatimah, Abd Rahman; Nor Azah, Yusof, Prof. Dr.; Uda, Hashim, Prof. Dr.; Mohammad Nuzaihan, Md Nor (Electrochemical Science Group (ESG), 2013)
      This paper reports the process development of silicon nanowires sensor requires both the fabrication of nanoscale diameter wires and standard integration to CMOS process. By using silicon-on-insulator (SOI) wafer as a ...

    • Design and process development of silicon nanowire based DNA biosensor using electron beam lithography 

      Uda, Hashim; Siti Fatimah, Abd Rahman; Mohammad Nuzaihan, Md Nor; Shahrir, Salleh (Institute of Electrical and Electronics Engineering (IEEE), 2008-12-01)
      Silicon nanowires (SiNWs) have their unique feature such as similar diameters to biomolecules, chemically tailorable physical properties, enable to apply in biomolecule detection and can be fabricated as a high performance ...

    • Fabrication of silicon nanowires by electron beam lithography and thermal oxidation size reduction method 

      Mohammad Nuzaihan, Md Nor; Uda, Hashim, Prof. Dr.; Nazwa, Taib; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)
      A simple method for the fabrication of silicon nanowires using Electron Beam Lithography (EBL) combined with thermal oxidation size reduction method is presented. EBL is used to define the initial silicon nanowires of ...

    • Man-2403 resist development for electron beam lithography process 

      Nur Hamidah, Abdul Halim; Uda, Hashim, Prof. Dr.; Mohammad Nuzaihan, Md Nor (Universiti Malaysia Pahang, 2009-06-20)
      Line-width of resist patterns is more susceptible to the developing time than the thickness of the undeveloped resist. This project focused on the development of MaN-2403 resist for e-beam lithography process. The ...

    • Nanowire formation using electron beam lithography 

      Rahman, S. F. A.; Uda, Hashim, Prof. Dr.; Mohammad Nuzaihan, Md Nor; Mohamed Nuri, A. M.; Mohamad Emi Azri, Shohini; Salleh, S. (American Institute of Physics, 2009-06-01)
      Miniaturization and performance improvements are driving the electronics industry to shrink the feature size of semiconductor device. Because of its diffraction limit, conventional photolithography is becoming increasingly ...

    • Negative Pattern Scheme (NPS) design for nanowire formation using scanning electron microscope based electron beam lithography technique 

      Mohammad Nuzaihan, Md Nor; Uda, Hashim, Prof. Dr.; Siti Fatimah, Abdul Rahman; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)
      In this work, we report the used of Negative Pattern Scheme (NPS) by Electron Microscope Based Electron Beam Lithography (EBL) Technique in connection with scanning electron microscope (SEM) for creating extremely fine ...

    • Pattern designed for combination of optical lithography and electron beam lithography 

      S. Fatimah, Abd Rahman; Uda, Hashim, Prof. Dr.; Mohammad Nuzaihan, Md Nor; A. M., Mohamed Nuri; Muhamad Emi Azri, Shohini (Universiti Malaysia Pahang, 2009-06-20)
      In this paper the fabricated pattern of nanometer and micrometer structures created with electron beam lithography (EBL) and optical lithography on silicon on insulator (SOI) material is presented. The resist used to ...

    • PMMA characterization and optimization for Nano Structure formation 

      S Niza, Mohammad Bajuri; Nur Hamidah, Abdul Halim; Mohammad Nuzaihan, Md Nor; Uda, Hashim (Kolej Universiti Kejuruteraan Utara Malaysia, 2005-05-18)
      The limitations imposed on optical lithography by the wavelength of light have been overcome using electron lithography. Electron lithography offers high resolution because of the small wavelength of the 10-50 keV electrons ...