Browsing Mohd Mustafa Al Bakri Abdullah, Prof. Dr. by Subject "SEM"

Now showing items 1-13 of 13

    • Alteration in the microstructure of fly ash geopolymer upon exposure to elevated temperatures 

      Omar A., Abdulkareem; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2013)
      This paper represents the mechanical and microstructure changes in geopolymeric material synthesized by the alkali activation of locally source fly ash at high temperatures of 400, 600 and 800 °C. The high compressive ...

    • Characterization of LUSI mud volcano as geopolymer raw material 

      Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak; Djwantoro, Hardjito, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2012)
      The mud of mud volcano samples were collected from an eruption site named 'LUSI' (Lumpur "mud" -Sidoarjo), East Java, Indonesia for characterization. Analysis showed that, the major constituents of mud are SiO 2 and Al 2O ...

    • Characterization of LUSI mud volcano as geopolymer raw material: A review 

      Rafiza, Abdul Razak; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr. Ir.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      This paper summarizes the current knowledge about the potential of LUSI mud volcano, East Java, Indonesia as a raw material in geopolymer. Previous experimental study shows that the LUSI mud has a good performance when 5% ...

    • Comparison of original and sintered LUSI mud from East Java, Indonesia as raw material for making a geopolymer 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (American Scientific Publishers, 2013-01)
      This paper presents the characterization of LUSI mud from East Java, Indonesia, as a potential raw material for making a geopolymer. Two types of LUSI mud were analyzed, i.e., original LUSI mud and LUSI mud that had been ...

    • The effect of curing temperature on physical and chemical properties of geopolymers 

      Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Zarina, Yahya; Rafiza, Abdul Razak (Elsevier BV, 2011)
      Fly ash-based geopolymers required heat to increase the geopolymerization process in order to obtain higher compressive strength. As such, geopolymer samples were prepared using different curing temperatures (room temperature, ...

    • Effects of cure characteristics, mechanical and morphological properties of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends 

      Ahmad Azrem, Azmi; Nik Noriman, Zulkepli, Dr.; Muhammad Razif, Nordin; Mohd Mustafa Al Bakri, Abdullah; Sandu, Ion; Mohd Arif Anuar, Mohd Salleh; Hanafi, Ismail (Revista De Materiale Plastice, 2013-09)
      The effects of tensile and morphological properties of styrene butadiene rubber/virgin chloroprene rubber blends (SBR/CRv) and styrene butadiene rubber/recycled chloroprene rubber blends (SBR/CRr) were investigated. The ...

    • Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete 

      Omar A., Abdulkareem; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Dr.; Saif, Ala’eddin A. (Elsevier, 2014-01)
      This paper reports a comparative study of the influence of elevated temperature on geopolymer paste, mortars and lightweight aggregate geopolymer concrete (LWAGC) systems made by using fly ash (FA) as only source material. ...

    • The influences of tor as a compatibilizer on cure characteristic and morphological properties of SBR/CRr blends 

      Ahmad Azrem, Azmi; Nik Noriman, Zulkepli, Dr.; Razif, Mohammad Nordin, Dr.; Sam, Sung Ting, Dr.; Mohd Mustafa Al-Bakri, Abdullah (AENSI Publisher All rights reserved, 2013-10)
      Cure characteristics and morphological studies were performed to determine the influences of TOR as a compatibilizer of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) Blends. Both uncompatibilised and ...

    • Microstructural analysis of geopolymer and ordinary Portland cement mortar exposed to sulfuric acid 

      Mohd Izzat, Ahmad; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Moga, Ligia Mihaela; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Muhammad Faheem, Mohd Tahir; Sandu, Andrei Victor (Revista De Materiale Plastice, 2013-09)
      The vulnerability of ordinary Portland cement (OPC) concrete to acidic attack is a worrying subject regarding the future durability of this binder. On the other side of binder's technology, the new technology of cement ...

    • Microstructure study on optimization of high strength fly ash based geopolymer 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya (Trans Tech Publications, 2012)
      The compressive strength and microstructural characteristics of fly ash based geopolymer with alkaline activator solution were investigated. The sodium hydroxide and sodium silicate were mixed together to form an alkaline ...

    • Microstructure study on volcano ash geopolymer aggregate at different sintering temperature 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Djwantoro, Hardjito, Dr.; Wan Hamidon Wan Badaruzzaman, Ir. Dr.; Zarina, Yahya (Trans Tech Publications, 2014)
      Recent research shows that the by-product materials such as fly ash can be used as raw material in producing aggregates and lightweight aggregates. The usage of this material can improve the quality of the aggregates ...

    • Optimization of NaOH Molarity, LUSI Mud/Alkaline Activator, and Na2SiO3/NaOH Ratio to Produce Lightweight Aggregate-Based Geopolymer 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Djwantoro, Hardjito; Zarina, Yahya (MDPI AG, 2015-05-21)
      This paper presents the mechanical function and characterization of an artificial lightweight geopolymer aggregate (ALGA) using LUSI (Sidoarjo mud) and alkaline activator as source materials. LUSI stands for LU-Lumpur and ...

    • Study on physical and chemical properties of fly ash from different area in Malaysia 

      Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Rafiza, Abdul Razak; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Alida, Abdullah; Zarina, Yahya (Trans Tech Publications, 2013-12)
      Fly ash is residue from the combustion of coal which widely available in worldwide and lead to waste management proposal. Moreover, the use of fly ash is more environmental friendly and save cost compared to OPC. Fly ash ...