Show simple item record

dc.contributor.authorMurizam, Darus
dc.contributor.authorShamsul, Baharin Jamaludin, Prof. Dr.
dc.contributor.authorMohd Arif Anuar, Mohd Salleh
dc.contributor.authorFaizul, Che Pa
dc.contributor.authorRuhiyuddin, Mohd Zaki
dc.date.accessioned2014-05-29T03:11:56Z
dc.date.available2014-05-29T03:11:56Z
dc.date.issued2013
dc.identifier.citationAdvanced Materials Research, vol.795, 2013, pages 679-683en_US
dc.identifier.isbn978-303785811-0
dc.identifier.issn10226680
dc.identifier.urihttp://www.scientific.net/AMR.795.679
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/34849
dc.descriptionLink to publisher's homepage at http://www.ttp.net/en_US
dc.description.abstractThe development of precipitate during ageing treatment of A319 alloy contributed significantly to the alloy strengthening mechanism. Two solution treatment temperatures which were set at 510°C and 525°C were subjected onto the different groups of A319 alloy samples and followed by artificial ageing process at 180°C. Scanning electron microscopy was employed to observe the over-aged samples from both solution treatment temperatures. The observation shows that Mg2Si precipitates was only appeared at the higher solution treatment condition, while the Al2Cu precipitate developed in both solution treatment temperatures.en_US
dc.language.isoenen_US
dc.publisherTrans Tech Publicationsen_US
dc.subjectA319 alloyen_US
dc.subjectArtificial ageingen_US
dc.subjectPrecipitates solution treatmenten_US
dc.titleAlteration of solution treatment condition to the precipitation behaviour A319 alloyen_US
dc.typeArticleen_US
dc.identifier.url10.4028/www.scientific.net/AMR.795.679
dc.contributor.urlmurizam@unimap.edu.myen_US
dc.contributor.urlsbaharin@unimap.edu.myen_US
dc.contributor.urlarifanuar@unimap.edu.myen_US
dc.contributor.urlfaizul@unimap.edu.myen_US
dc.contributor.urlruhiyuddin@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record