Now showing items 1-20 of 29

    • Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Md. Fazlul, Bari, Dr. (Trans Tech Publications, Switzerland, 2011)
      This research was carried out to fabricate and characterize Co-Cr-Mo (F-75) alloy. The samples have been prepared via solid state sintering. The lab work comprises the mixing of F-75 alloy powder with 2 wt. % of binder. ...
    • Characterization of Ni0.5LiXZn(0.5-X)Fe2O4 synthesized by co-precipitation method 

      Rohadiana Dwi Nofianti; Zul Azhar, Zahid Jamal; Md Fazlul, Bari; Shamsul Baharin, Jamaludin, Prof. Dr. (SIRIM, 2010-11-22)
    • Extraction mechanism of Gd3+ by BTMPPA 

      Md Fazlul, Bari; Bahruddin, Saad; Ismail, Abdur Rahman; Muhammad Idris, Salleh (Elsevier, 2006)
      The extraction behavior of Gd(III) from acidic nitrate-acetato medium by bis(2,4,4-trimethylpentyl)phosphinic acid (BTMPPA, H2A2) in toluene either alone or in combination with trioctylphospine oxide (TOPO, B) has been ...
    • Extraction of silica from palm ash using citric acid leaching treatment: Preliminary result 

      Faizul, Che Pa; Abdullah, Chik, Prof. Madya Dr.; Md Fazlul, Bari, Dr. (Trans Tech Publications, 2013)
      Large quantities of agricultural wastes such as palm ash and rice husk are found throughout Malaysia, have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive ...
    • Extraction of silica from palm ash using organic acid leaching treatment 

      Faizul, Che Pa; Abdullah, Chik, Prof. Madya Dr.; Md Fazlul, Bari, Dr.; Noorina Hidayu, Jamil (Trans Tech Publications, 2014)
      Agricultural wastes such as palm ash and rice husk have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive researches have been carried out to extract silica from ...
    • Extraction of silica from palm ashvia citric acid leaching treatment 

      Faizul, Che Pa; Abdullah, Chik, Prof. Madya Dr.; Md Fazlul, Bari, Dr. (AENSI Publisher All rights reserved, 2013-10)
      Agricultural wastes such as palm ash and rice husk have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive researches have been carried out to extract silica from ...
    • Future of nanotube structured cathodes for solid oxide fuel cell 

      Md. Rakibul, Hasan; Md Fazlul, Bari, Dr.; Uda, Hashim, Prof. Dr.; Sharifah Bee, O.A Abd Hamid, Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      The research on fuel cell is in progress with the increasing demand of present day fuel. The performance of solid oxide fuel cell largely depends on cathode materials and microstructures. A lot of effort has been put but ...
    • Hydrophobic silica nano-tube immobilized with Cyanex 272 for the extraction of metal ions 

      Md Fazlul, Bari; Noorzahan, Begum; Shamsul Baharin, Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr. (Universiti Malaysia Pahang, 2009-06-20)
      This paper reports on the synthesis and application of hydrophobic silica nano-tubes immobilized with Cyanex 272 (HBSNC) as a new, inexpensive and easily prepared solid-phase extractant for the extraction of Cu(II), ...
    • The influence of sintering temperature to the physical properties of P/M Co-Cr-Mo (F-75) alloy 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin; Md. Fazlul, Bari (Universiti Malaysia Perlis, 2009-12-01)
      Co-Cr-Mo (F-75) alloys are commonly used for surgical implants because of their strength, corrosion resistance and biocompatibility. Conventionally, fabrication of the alloys has been established using casting technique. ...
    • The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets 

      Shamsul Baharin, Jamaludin; Ahmad Latiffi, A. A. T.; Khairel Rafezi, Ahmad; Fazlul, Bari (Universiti Malaya, 2009)
      In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ...
    • The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Ahmad Latiffi, A. A. T.; Khairel Rafezi, Ahmad; Md. Fazlul, Bari (University of Malaya, 2009)
      In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ...
    • Investigate the liberation of copper from waste Printed Circuit Boards (PCBs) 

      Mohd Zaheruddin, Kasmuin; Aimi Noorliyana, H.; Md. Fazlul, Bari; Sri Asliza, Md. Amin; Faizul, Che Pa; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Universiti Malaysia PerlisSchool of Materials Engineering & School of Environmental Engineering, 2010-06-09)
      Nowadays the waste PCBs increasing sharply proportionally the number of personal computers which is 5.7 million in 2005 and the predict amounts, it will be increase to 11.5 Million in 2010 (Unit Perancangan Ekonomi, ...
    • Kinetic and thermodynamic studies on adsorption of copper ions onto pomelo peel (citrus grandis) 

      Mst. Noorzahan, Begum, Dr.; Aimi Noorliyana, Hashim; Md Fazlul, Bari, Dr.; Norzilah, Abdul Halif, Dr.; Nur Hidayah, Ahmad Zaidi; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)
      The ability of pomelo peel (PP) as natural adsorbent to remove Cu (II) ions from aqueous solution was investigated. The influence of solution pH, contact time and temperature were evaluated. Cu (II) removal increased as ...
    • Micro Capsule with Functional Group for Diverse Application 

      Md Fazlul, Bari, Dr.; Kamaruddin, Husin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Shamsul Baharin, Jamaludin, Prof. Dr. (Malaysian Invention & Design Society (MINDS), 2006-05-19)
      Polymeric micro capsules containing functional group are prepared using suspension polymerization technique. This micro capsule can be used in diverse application such as selective separation of metals, recovery of high ...
    • Microstructure and properties of Co-Cr-Mo alloy as a function of isothermal holding time 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Md. Fazlul, Bari, Dr. (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Currently, Co-Cr-Mo alloys become attractive in the field of biomaterials for surgical implants because of their strength, corrosion resistance and biocompatibility. In this work the influence of sintering time on the ...
    • NanoDNA chip for the detection of porcine derivatives in halal products 

      Md. Eaqub, Ali; Uda, Hashim, Prof. Dr.; Md. Fazlul, Bari, Dr. (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Pig (Sus scrofa) mitochondrial genome was analyzed for AluI sites by NEB cutter version 2 and REBASE softwares. Out of 66 AluI fragments, five were selected as probes for the construction of porcine mitochondrial DNA ...
    • Palm Ash as an Alternative Source for Silica Production 

      Faizul, Che Pa; Abdullah, Chik; Md. Fazlul, Bari (EDP Sciences, 2016)
      Agricultural wastes such as palm ash and rice husk have a possibility to be used as a useful renewable source for the production of silica (SiO2). Extensive researches have been carried out to extract silica from agricultural ...
    • Photoelectrocatalytic activity of Zn-loaded RGO-TiO₂ composite coatings on mild steel substrate via DC electrochemical co-deposition 

      Rakibul, Hasan; Chin Wei, Lai; Sharifah Bee, Abd Hamid; Wan Jeffrey, Basirun; Zainovia, Lockman; Md. Fazlul, Bari, Assoc. Prof. Dr. (EDP Sciences, 2014-02)
      The photoelectrocatalytic activity of Zn-loaded reduced graphene oxide-titania (RGO-TiO₂) composite coatings on mild steel substrate was investigated in detail. Zn-loaded RGO-TiO₂ composite films were prepared by using DC ...
    • Preparation and characterization of silica aerogel immobilized with cyanex 301 for extraction of Zn(II) 

      Mst. Noorzahan, Begum, Dr.; Md Fazlul, Bari, Dr.; Salmie Suhana, Che Abdullah; Khairel Rafezi, Ahmad, Dr.; Nasim, Ahmed, Dr. (Trans Tech Publications, 2013)
      A new solid phase extractant silica aerogel immobilized with Cyanex 301 {bis(2,4,4- trimethylpentyl) dithiophosphinic acid} (SAWC) was prepared via a sol- gel method and investigated for the extraction of Zn(II) from aqueous ...
    • Preparations and biomedical applications of magnetic nanoparticles and nanocomposites 

      Md. Eaqub, Ali; Md. Fazlul, Bari; Mohd Noor, Ahmad (Universiti Malaysia Perlis, 2009-12-01)
      This review is focused on the current synthetic routes for the preparation of magnetic nanoparticles and nanocomposites as well as their surface modifications with functional groups useful for biomedical applications. Some ...