Search
Now showing items 1-8 of 8
Extraction of silica from palm ash using organic acid leaching treatment
(Trans Tech Publications, 2014)
Agricultural wastes such as palm ash and rice husk have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive researches have been carried out to extract silica from ...
Potential application of palm ash as a raw materials in production of green glass
(Scientific.Net/Trans Tech Publications, 2012-12)
Oil Palm Ash is one of the abundance agricultural wastes found in Malaysia. This wastes need to be disposed properly. Oil palm ash contains compounds needed to produce glass. Most of raw materials (especially silica) used ...
Production of wollastonite from local resources
(Trans Tech Publications, 2013)
This project is focused on the production of wollastonite (CaSiO3) from local resources. Wollastonite was produced by milling silica (SiO2) and limestone (CaCO3) in planetary mill for 1 and 5 hours. Samples have been ...
Production of silicon carbide via grinding and heat treatment process
(Trans Tech Publications, 2014)
This study is to determine the properties and characterization of silicon carbide via grinding and heat treatment process. In this study, the raw materials used were waste glass and graphite powder. Silicon carbide was ...
Effect of process parameters on the cooling performance of liquid cooling system for electronic application
(Trans Tech Publications, 2013)
This project is focused to study on the cooling performance of liquid cooling system under different process parameter. In this research, a liquid cooling system with copper block that simulates CPU, was setup to identify ...
Self-Fluxing Mechanism in Geopolymerization for Low-Sintering Temperature of Ceramic
(MDPI AG, 2021-03-10)
Kaolin, theoretically known as having low reactivity during geopolymerization, was used as a source of aluminosilicate materials in this study. Due to this concern, it is challenging to directly produce kaolin geopolymers ...
Phase Transformation of Kaolin-Ground Granulated Blast Furnace Slag from Geopolymerization to Sintering Process
(MDPI AG, 2021-02)
The main objective of this research was to investigate the influence of curing temperature on the phase transformation, mechanical properties, and microstructure of the as-cured and sintered kaolin-ground granulated blast ...
Fabrication of porous ceramic-geopolymer based material to improve water absorption and retention in construction materials: a review
(IOP Publishing Ltd, 2017-06)
Porous ceramic nowadays has been investigated for a variety of its application such as filters, lightweight structural component and others due to their specific properties such as high surface area, stability and permeability. ...