This page provides access to research works by Noorina Hidayu Jamil, currently a Lecturer of School of Mechatronic Engineering, Universiti Malaysia Perlis (UniMAP).

News

Skills and Expertise: Particle Size, Material Characterization,Particle, Sonication and Silicate.

Recent Submissions

  • Production of wollastonite from local resources 

    Noorina Hidayu, Jamil; Wan Mohd Arif, Wan Ibrahim; Noorhamizah, Muhd Said (Trans Tech Publications, 2013)
    This project is focused on the production of wollastonite (CaSiO3) from local resources. Wollastonite was produced by milling silica (SiO2) and limestone (CaCO3) in planetary mill for 1 and 5 hours. Samples have been ...
  • Influence of milling conditions on the mechanochemical synthesis of CaTiO3 nanoparticles 

    Noorina hidayu, Jamil; Palaniandy, Samayamutthirian, Dr. (Elsevier, 2009)
    The mechanochemical synthesis of calcium titanate (CaTiO3), was carried out in a planetary mill by varying the milling time and mill rotational speed at three levels. CaCO3 and TiO2 were used as the starting materials. ...
  • Acid medium sonication: a method for the preparation of low density talc nano-sheets 

    Noorina hidayu, Jamil; Palaniandy, Samayamutthirian, Dr. (Elsevier, 2010)
    Talc nano-sheets having a thickness of around 12nm, a high shape asymmetry, and a well-preserved crystalline order were prepared by jet milling followed by anacid medium sonication process. Milling facilitates the exfoliation ...
  • Comparative study of water-based and acid based sonications on structural changes of talc 

    Noorina hidayu, Jamil; Palaniandy, Samayamutthirian, Dr. (Elsevier BV, 2011)
    Talc was sonicated in both water and acid media up to 100h and 40h, respectively. The sonicated talc exhibited severe delamination and reduction of the plate diameter in the lateral dimension. The density of sonicated ...
  • Production of silicon carbide via grinding and heat treatment process 

    Noorina Hidayu, Jamil; Xian, W. Hui; Wan Mohd Arif, Wan Ibrahim; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki (Trans Tech Publications, 2014)
    This study is to determine the properties and characterization of silicon carbide via grinding and heat treatment process. In this study, the raw materials used were waste glass and graphite powder. Silicon carbide was ...
  • Extraction of silica from palm ash using organic acid leaching treatment 

    Faizul, Che Pa; Abdullah, Chik, Prof. Madya Dr.; Md Fazlul, Bari, Dr.; Noorina Hidayu, Jamil (Trans Tech Publications, 2014)
    Agricultural wastes such as palm ash and rice husk have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive researches have been carried out to extract silica from ...
  • Effect of process parameters on the cooling performance of liquid cooling system for electronic application 

    Wan Mohd Arif, Wan Ibrahim; Yeoh, Cheow Keat, Dr.; Teh, Pei Leng, Dr.; Noorina Hidayu, Jamil (Trans Tech Publications, 2013)
    This project is focused to study on the cooling performance of liquid cooling system under different process parameter. In this research, a liquid cooling system with copper block that simulates CPU, was setup to identify ...
  • Potential application of palm ash as a raw materials in production of green glass 

    Noorina Hidayu, Jamil; Mohd Mustafa Al Bakri, Abdullah; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki; Murizam, Darus; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohamed Faisol, Mohamed Nor (Scientific.Net/Trans Tech Publications, 2012-12)
    Oil Palm Ash is one of the abundance agricultural wastes found in Malaysia. This wastes need to be disposed properly. Oil palm ash contains compounds needed to produce glass. Most of raw materials (especially silica) used ...