Browsing Mohd Arif Anuar Mohd Salleh, Associate Professor Dr. Ir. by Author "Mohd Mustafa Al Bakri, Abdullah"

Now showing items 1-20 of 23

    • Bonding strength characteristics of FA-based geopolymer paste as a repair material when applied on OPC substrate 

      Warid Wazien, Ahmad Zailani; Bouaissi, Aissa; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd Razak; Yoriya, Sorachon; Mohd Arif Anuar, Mohd Salleh; Mohd Remy Rozainy, M. A. Z.; Hamzah, Fansuri (MDPI AG, 2020-05)
      This investigative study aims to study the mechanical and morphological properties of fly ash (FA)-based geopolymer paste as a repair material when applied on ordinary Portland cement (OPC) overlay concrete. The first part ...

    • Bonding strength characteristics of FA-based geopolymer paste as a repair material when applied on OPC substrate 

      Warid Wazien, Ahmad Zailani; Bouaissi, Aissa; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd Razak; Yoriya, Sorachon; Mohd Arif Anuar, Mohd Salleh; Mohd Remy Rozainy, M. A. Z.; Hamzah, Fansuri (MDPI AG, 2020-05)
      This investigative study aims to study the mechanical and morphological properties of fly ash (FA)-based geopolymer paste as a repair material when applied on ordinary Portland cement (OPC) overlay concrete. The first ...

    • A comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methods 

      Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Norainiza, Saud; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; McDonald, Stuart D.; Nogita, Kazuhiro (Syscom 18 SRL, 2013-07)
      The properties of Sn-0.7Cu solder bulk prepared via the powder metallurgy (PM) method were investigated and compared with solder bulk fabricated through casting. Distinct microstructures were observed in both PM and casting ...

    • Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature 

      Alida, Abdullah; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Zarina, Yahya; Mohd Arif Anuar, Mohd Salleh; Nurhamidah, Zakaria; Muhammad Faheem, Mohd Tahir (Trans Tech Publications, 2014)
      This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...

    • Effect of graphene oxide on microstructure and optical properties of TiO₂ thin film 

      Azliza, Azani; Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Mohd Fairul Sharin, Abdul Razak; Norsuria, Mahmed; Muhammad Mahyiddin, Ramli; Ayu Wazira, Azhari; Chobpattana, Varistha (IOP Publishing Ltd, 2019-12)
      GO/TiO₂ thin films have been synthesized from titanium (IV) isopropoxide (TTIP) by a sol-gel method. The films were deposited onto a glass substrate using spin coating deposition technique then were subjected to annealed ...

    • The effect of thermal annealing on the microstructure and mechanical properties of Sn-0.7Cu-xZn solder joint 

      Mohd Izrul Izwan, Ramli; Mohd Arif Anuar, Mohd Salleh; Rita, Mohd Said; Mohd Mustafa Al Bakri, Abdullah; Dewi Suriyani, Che Halin; Norainiza, Saud; Nabiałek, Marcin (MDPI AG, 2021-02)
      The microstructural properties of a Pb-free solder joint significantly affect its mechanical behaviours. This paper details a systematic study of the effect of the annealing process on the microstructure and shear strength ...

    • Effects of Recycled-Aluminium additions on the mechanical properties of Sn-0.7Cu/Cu-Substrate lead-free solder joints 

      Mohd Arif Anuar, Mohd Salleh; Somidin, Flora; Mohd Mustafa Al Bakri, Abdullah; Nik Noriman, Zulkepli; Mayappan, Ramani; Noor Farhani, Mohd Alui (Trans Tech Publications, 2013)
      Varying amount of recycled-Aluminium (0, 3.0, 3.5 and 4.0 wt.% re-Al) particulates produced from aluminium beverage cans were successfully reincorporated into Sn-0.7Cu base matrix solder material via powder metallurgy ...

    • Graphene geopolymer hybrid: a review on mechanical properties and piezoelectric effect 

      Nuaim Siddiqi, Danial; Dewi Suriyani, Che Halin; Muhammad Mahyiddin, Ramli; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Siti S., Mat Isa; L. F., A. Talip; N. S., Mazlan (IOP Publishing Ltd, 2019-08)
      A review on graphene geopolymers hybrid is presented, focusing on the mechanical properties and piezoelectric effect. The method and way of mixing graphene with geopolymers are discussed, including form of graphene that ...

    • Hybrid mold: comparative study of rapid and hard tooling for injection molding application using Metal Epoxy Composite (MEC) 

      Radhwan, Hussin; Safian, Sharif; Nabiałek, Marcin; Shayfull Zamree, Abd Rahim; Mohd Tanwyn, Mohd Khushairi; Mohd Azlan, Suhaimi; Mohd Mustafa Al Bakri, Abdullah; Mohd Hazwan, Mohd Hanid; Wysłocki, Jerzy J.; Bloch, Katarzyna (MDPI AG, 2021-02)
      The mold-making industry is currently facing several challenges, including new competitors in the market as well as the increasing demand for a low volume of precision moldings. The purpose of this research is to appraise ...

    • Influence of kaolin geopolymer ceramic additions to the wettability and electrical properties of Sn-3.0Ag-0.5Cu (SAC305) lead free solder 

      Nur Syahirah, Mohamad Zaim; Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Marliza, Mostapha; Romisuhani, Ahmad (IOP Publishing Ltd, 2019-12)
      The effect of kaolin geopolymer ceramic addition to the wettability and electrical resistivity of Sn-3.0Ag-0.5Cu (SAC305) lead free solder was successfully explored. Powder metallurgy with microwave sintering method was ...

    • Mesoporous structure of doped and undoped PEG on Ag/TiO₂ thin film 

      Kamrosni, Abdul Razak; Dewi Suriyani, Che Halin; Azliza, Azani; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Norsuria, Mahmed; Muhammad Mahyiddin, Ramli; Suhaila, Sepeai (IOP Publishing Ltd, 2019-08)
      In this reaserch, photocatalyst silver titanium dioxide was doped and modified by Polyethylene Glycol (PEG). The purpose of the present study was to analyse the synthesized Ag/TiO₂ thin film doped and undoped PEG. Ag/TiO₂ ...

    • Microstructural studies of doped PEG Ag/TiO₂ thin film 

      Kamrosni, Abdul Razak; Dewi Suriyani, Che Halin; Azliza, Azani; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Norsuria, Mahmed; Chobpattana, Varistha; Ayu Wazira, Azhari (IOP Publishing Ltd, 2019-12)
      Ag/TiO₂ thin film was prepared by the sol-gel method through the hydrolysis of titanium tetraisopropoxide and silver nitrate solution. Various amount of PEG was doped into the solution preparation to study the effect on ...

    • Microstructure and wettability of Graphene Oxide/TiO2 thin film prepared via sol-gel method 

      Azliza, Azani; Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Norsuria, Mahmed; Muhammad Mahyiddin, Ramli; Suhaila, Sepeai (IOP Publishing Ltd, 2019-08)
      The microstructure of graphene oxide TiO2 (GO/TiO2) films on wettability and morphology properties were studied at different amount of Titanium isopropoxide with fixed amount of GO. GO/TiO2 thin films were prepared by using ...

    • Microstructure evolution of Ag/TiO₂ thin film 

      Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Mohd Arif Anuar, Mohd Salleh; Mohd Izrul Izwan, Ramli; Mohd Mustafa Al Bakri, Abdullah; Ayu Wazira, Azhari; Kazuhiro, Nogita; Hideyuki, Yasuda; Nabiałek, Marcin; Wysłocki, Jerzy J. (MDPI AG, 2021-01)
      Ag/TiO₂ thin films were prepared using the sol-gel spin coating method. The microstructural growth behaviors of the prepared Ag/TiO₂ thin films were elucidated using real-time synchrotron radiation imaging, its structure ...

    • Microstructure studies on different types of Geopolymer materials 

      Mohd Mustafa Al Bakri, Abdullah; Adila, Abdullah; Muhammad Faheem, Mohd Tahir; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Mohd Arif Anuar, Mohd Salleh; Sandu, AV (Trans Tech Publications, 2013)
      Geopolymer is a new binding material produced to substitute the ordinary Portland cement (OPC) function as a binder in concrete. As we know, different types of geopolymer will have different properties. In this research, ...

    • Nickel (Ni) microalloying additions in Sn-Cu lead-free solder. short review 

      Mohd Arif Anuar, Mohd Salleh; Sandu, I G; Mohd Mustafa Al Bakri, Abdullah; Sandu, I (IOP Publishing Ltd, 2017-06)
      In this digital-age era, solder plays important role in electronic packaging industries. As interconnects material, solder provide an electrical and mechanical support to the electronics devices. Solder usually consist of ...

    • Performance of Sn-3.0Ag-0.5Cu composite solder with kaolin geopolymer ceramic reinforcement on microstructure and mechanical properties under isothermal ageing 

      Nur Syahirah, Mohamad Zaimi; Mohd Arif Anuar, Mohd Salleh; Sandu, Andrei Victor; Mohd Mustafa Al Bakri, Abdullah; Norainiza, Saud; Shayfull Zamree, Abd Rahim; Vizureanu, Petrica; Rita, Mohd Said; Mohd Izrul, Izwan Ramli (MDPI AG, 2021-02)
      This paper elucidates the effect of isothermal ageing at temperature of 85 °C, 125 °C and 150 °C for 100, 500 and 1000 h on Sn-3.0Ag-0.5Cu (SAC305) lead-free solder with the addition of 1 wt% kaolin geopolymer ceramic (KGC) ...

    • Phase study of titanium dioxide nanoparticle prepared via sol-gel process 

      Oladeji Araoyinbo, Alaba; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Nurul Nadia, Abdul Aziz; Azwan Iskandar, Azmi (IOP Publishing Ltd, 2018-03)
      In this study, titanium dioxide nanoparticles have been prepared via sol-gel process using titanium tetraisopropoxide as a precursor with hydrochloric acid as a catalyst, and ethanol with deionized water as solvents. The ...

    • Recent graphene oxide/TiO₂ thin film based on self-cleaning application 

      A. Azani; Dewi Suriyani, Che Halin; Kamrosni, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Mohd Arif Anuar, Mohd Salleh; Norsuria, Mahmed; Muhammad Mahyiddin, Ramli; Ayu Wazira, Azhari; Chobpattana, V. (IOP Publishing Ltd, 2019-08)
      Graphene oxide/TiO₂ (GO/TiO₂) thin films works as self-cleaning device have been developed in various method onto selected substrates. It was noticeable that graphene oxide is the best form in the group of graphene family. ...

    • Research advances of composite solder material fabricated via powder metallurgy route 

      Mohd Arif Anuar, Mohd Salleh; Muhammad Hafiz, Hazizi; Mohd Mustafa Al Bakri, Abdullah; Nik Noriman, Zulkepli; Ramani, Mayapan; Zainal Ariffin, Ahmad (Scientific.Net/Trans Tech Publications, 2012-12)
      Researches and studies on composite solder have been done by many researchers in an effort to develop viable lead-free solders which can replace the conventional lead-based solders as lead is considered as toxic. Solder ...