Search
Now showing items 1-7 of 7
Microwave sintering of pure iron with addition of stearic acid as binder
(Trans Tech Publications, 2012)
The purpose of this study is to investigate the effect of the stearic acid as binder in sintering pure iron using a microwave furnace. The study was focused in mechanical properties such as porosity, density and micro-hardness ...
Selective extraction, separation and recovery of Cu(II) in presence of Zn(II) and Ni(II) from leach liquor of waste printed circuit board using microcapsules coated with Cyanex 272
(Springer Verlag, 2012-05)
The study was conducted to optimize the selective extraction and recovery of Cu(II) in the presence of Zn(II) and Ni(II) from the leach liquor of waste printed circuit boards (PCBs). The extraction experiments were carried ...
Fly ash as Sand Replacement Material (SRM) in the development of composite cement: Physical and mechanical properties
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)
There has been vast research enhancing the usage of industrial wastes in engineering applications. This research paper reports the effect of fly ash on the physical and mechanical properties of composite cement. Fly ash ...
Compressive strength and crack propagation of cement composites reinforced coconut fibre
(Medwell Journals, 2012)
This study presents the compressive strength and crack propagation of cement composites reinforced coconut fibre. The development of cement composites in this research were done by substituting coconut fibre to the portion ...
Mechanical properties and fracture behaviour of coconut fibre-based green composites
(Foundation for Materials Science and Engineering “Serban Solacolu”, 2012)
This paper presents the influence of natural fibre content on the mechanical properties of coconut fibre based-green composites. The mixture ratio of cement:sand by weight was fixed at 1:1. Coconut fibre was used as ...
Mechanical properties and wear behavior of brake pads produced from palm slag
(Trans Tech Publications, 2012)
Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...
Aluminium - Polymer abs product
(Universiti Malaysia Perlis (UniMAP), 2012)
Material used for aluminium product usually made of aluminium scrap. Currently, the price of aluminium scrap is increase. It is necessary to minimize the cost of production by reducing the weight of the aluminium product ...