Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Subject "Microstructure"
Now showing items 1-7 of 7
-
Comparative characterization of Clinker’s microstructure at different temperature zone during cement production
(Science Publications, 2007)Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ... -
Development of a Lid Sealed furnace for the production of Magnesium alloys
(Universiti Kebangsaan Malaysia (UKM), 2008-12-03)An atmosphere-controlled furnace was designed for the casting process of highly reactive Mg metal and its alloys. Instead of open crucible furnace, the melting process was done under controlled atmosphere which contained ... -
Effect of alloying elements (Ni and Cr) on density and hardness of Co alloy fabricated by powder metallurgy
(Universiti Malaysia Perlisp.1-5, 2009-12-01)Influences of Ni and Cr addition on the properties of powder metallurgy Co base alloys were investigated. The alloys were produced by powder metallurgy technique and sintered under argon atmosphere. Scanning electron ... -
The effects of Al2O3 amount on the microstructure and properties of Fe-Cr matrix composites
(Springer, 2010-12)Iron based matrix composites reinforced with 5 to 25 wt pct of Al2O3 particles were fabricated using the powder metallurgy method. The samples were prepared by mixing at 250 rpm for 30 minutes, uniaxially pressing at 750 ... -
Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite
(Trans Tech Publications (TTP), 2013)A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ... -
Microstructure and microhardness properties of Fe-Cr-Al2O3 composites
(Universiti Putra Malaysia (UPM), 2010)The requirement for high performance materials of high wear and corrosion resistance lead to an increasing interest in ferrous matrix composites. Metal matrix composite of iron-chromium reinforced with alumina was fabricated ... -
Microstructure, Properties and Fracture Mechanism of Al 2014 Reinforced with Alumina Particles
(Kolej Universiti Kejuruteraan Utara Malaysia, 2004)The studies of microstructure, properties and fracture mechanism have been conducted on Al 2014 matrix alloy reinforced with 10 volume percent (Composite 1) and 15 volume percent (Composite 2) of alumina (Al2O3) particles ...