Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Subject "Aluminum"

Now showing items 1-5 of 5

    • Characterization of porous aluminum fabricated via sintering- dissolution process (SDP) 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Nik Mohd Fikry, Mohd Rushdi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...

    • Comparative study of corrosion behavior of AA2014/15 Vol%Al2O3p and AA2009/20 Vol% SiCw 

      Shamsul Baharin, Jamaludin; Z. Yusoff; Khairel Rafezi, Ahmad (Portuguese Electrochemical Society, 2008)
      The influence of heat treatment on the corrosion behavior of two aluminium matrix composites (AA2014/15 vol% Al2O3p - composite A and AA2009/20 vol% SiCw - composite B) was analyzed in 3.5% sodium chloride solution. The ...

    • The Microsructure and Properties of Aluminium Composite Reinforced with 65 μm Alumina Particles via Powder Metallurgy 

      Khairel Rafezi Ahmad; Wong Jing Lee; Ruhiyuddin Mohd Zaki; Mazlee Mohd Noor; Mohd Fitri Mohamad Wahid; Shaiful Rizam Shamsudin; Shamsul Baharin Jamaludin, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      This article will report the effect of weight percentage on the microstructure and properties of alumina particle reinforced aluminum metal matrix composite. This involved fabrication of aluminum composite via powder ...

    • Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Hadipramana, Josef; Mohd Fitri, Mohamad Wahid; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Azmi, Rahmat, Prof. (Trans Tech Publications (TTP), 2013)
      A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ...

    • Microstructure, Properties and Fracture Mechanism of Al 2014 Reinforced with Alumina Particles 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin (Kolej Universiti Kejuruteraan Utara Malaysia, 2004)
      The studies of microstructure, properties and fracture mechanism have been conducted on Al 2014 matrix alloy reinforced with 10 volume percent (Composite 1) and 15 volume percent (Composite 2) of alumina (Al2O3) particles ...