Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Subject "Alloys"
Now showing items 1-5 of 5
-
Effect of alloying elements (Ni and Cr) on density and hardness of Co alloy fabricated by powder metallurgy
(Universiti Malaysia Perlisp.1-5, 2009-12-01)Influences of Ni and Cr addition on the properties of powder metallurgy Co base alloys were investigated. The alloys were produced by powder metallurgy technique and sintered under argon atmosphere. Scanning electron ... -
The effects of solutionizing temperatures on microstructures of as-received A357 alloy
(Universiti malaysia Perlis, 2009-12-01)Solution treatment has been carried out on as-received A357 alloy at two solution treatment temperatures of 530ºC and 550ºC for 11 hours. The microstructural study was performed by using optical microscope. Optical ... -
Microstructural study and differential scanning Calorimetry analysis at elevated tempatures of superhead As-Cast A357 alloy
(Universiti Kebangsaan Malaysia (UKM), 2008-12-03)The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. ... -
Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique
(Science Publications, 2008)The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ... -
Microstructure, Properties and Fracture Mechanism of Al 2014 Reinforced with Alumina Particles
(Kolej Universiti Kejuruteraan Utara Malaysia, 2004)The studies of microstructure, properties and fracture mechanism have been conducted on Al 2014 matrix alloy reinforced with 10 volume percent (Composite 1) and 15 volume percent (Composite 2) of alumina (Al2O3) particles ...