Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Author "sbaharin@unimap.edu.my"

Now showing items 21-40 of 43

    • Fabrication and mechanical properties of composite palm ash mixed with phenolic resins 

      Mohd Radzi, Ali; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi; Che Mohd Ruzaidi, Ghazali, Prof. Madya (International Network for Scientific Information Publication (INSI), 2011-11)
      Brake pad is one of the important engineering components in automobile and it is fabricated by combination of various materials. Asbestos is one of the components in brake pad that is harmful to the human. In this ...

    • Fly ash as Sand Replacement Material (SRM) in the development of composite cement: Physical and mechanical properties 

      Nur Izzati, Muhd Nadzri; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd. Noor (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      There has been vast research enhancing the usage of industrial wastes in engineering applications. This research paper reports the effect of fly ash on the physical and mechanical properties of composite cement. Fly ash ...

    • The influence of particle sizes and compaction pressure on surface hardness of aluminum composite fabricated via powder metallurgy 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Zamri, Yusoff (INSInet Publications, 2011)
      A statistical analysis was used to anticipate the influence of particles sizes and compaction pressure on surface hardness of aluminum composites after compacted in a rigid die under an uniaxial compaction. Al-20 wt.% slag ...

    • Innovative Metal injection molding (MIM) method for producing CoCrMo alloy metallic prosthesis for orthopedic applications 

      Mohd Afian, Omar; Shamsul Baharin, Jamaludin, Prof. Dr.; Nurazilah, Mohd Zainon; Norazlan, Roslani; Mohd Nizam, Abd Jalil; Mohd Bakri, Mohd Hijazi; Ahmad Zahid, Omar; Noorsyakirah, Abdulah (Trans Tech Publications, 2014-01)
      Powder injection molding (PIM) is a powder metallurgy process currently used for the production of complicated and near net shape parts of high performance materials [. This technique basically combines the advantages of ...

    • Joining of dissimilar 6063 aluminium alloy-316L stainless steel by spot welding: tensile shear strength and heat treatment 

      Nur Farhana, Hayazi; Mazlee, Mohd Noor, Dr.; Shaiful Rizam, Shamsudin; Nur Farhana, Hayazi; Tan, Alvin Yin Zhen (Trans Tech Publications, 2013)
      Tensile shear strength and ageing treatment of dissimilar 6063 aluminum alloy-316L stainless steel joint fabricated by spot welding were investigated. The results showed that tensile shear strength increased with the ...

    • Mechanical properties and morphology of palm slag, calcium carbonate and dolomite filler in brake pad composites 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Liyana, Jamaludin; Mohd Mustafa Al Bakri, Abdullah (Trans Tech Publications, 2013)
      The development of asbestos free brake pad composites using different fillers was investigated with a intention to substitute asbestos which is known hazardous and carcinogenic. Mechanical and morphology studies were made ...

    • Mechanical properties and wear behavior of brake pads produced from palm slag 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...

    • Mechanical properties of dissimilar welds between stainless steel and mild steel 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Shahzan Kamarul, A. Kadir; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)
      Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ...

    • Metal Implant 

      Shamsul Baharin, Jamaludin, Prof. Dr; Mazlee, Mohd Noor, Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi (Malaysian Invention and Design Society (MINDS), 2006-05-19)
      This research product is cobalt-chromium metal implant produced by powder metallurgy technique.

    • Microstructure and in-vitro test bioactivity behavior of Co-Cr-Mo (F-75)/hydroxyapatite in phosphate buffered saline solution 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Maizatul Shima, Adzali; Mohd Nazree, Derman, Dr. (Technical University of Košice, 2014)
      Cobalt based alloys were the first metallic materials successfully used in orthopedic applications. However, these alloys are bioinert, it is necessary to make them bioactive in the human body to improve their application ...

    • Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Hadipramana, Josef; Mohd Fitri, Mohamad Wahid; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Azmi, Rahmat, Prof. (Trans Tech Publications (TTP), 2013)
      A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ...

    • Microstructure and microhardness properties of Fe-Cr-Al2O3 composites 

      Saidatulakmar, Shamsuddin; Shamsul Baharin, Jamaludin, Prof. Dr.; Zuhailawati, H.; Zainal Arifin, A. (Universiti Putra Malaysia (UPM), 2010)
      The requirement for high performance materials of high wear and corrosion resistance lead to an increasing interest in ferrous matrix composites. Metal matrix composite of iron-chromium reinforced with alumina was fabricated ...

    • Microwave sintering of pure iron with addition of stearic acid as binder 

      Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2012)
      The purpose of this study is to investigate the effect of the stearic acid as binder in sintering pure iron using a microwave furnace. The study was focused in mechanical properties such as porosity, density and micro-hardness ...

    • The need to intensify research efforts in the alternative to lead shot 

      Baba Gowon; Kahtan S., Mohammed, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Alida, Abdullah (Trans Tech Publications, 2014)
      The problem of lead poisoning resulting from the use of lead shot in hunting waterbirds and shooting sports has led to the partial ban, voluntary restriction and complete ban of lead shot in some countries. The ban resulted ...

    • Optimization of sintering temperature on microwave sintering of the composite iron-chromium reinforced with alumina particles 

      Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2014-01)
      Microwave sintering technology has become attractive and gained interest among material researchers due its capability and advantages over conventional sintering. Since two decades ago, intensive researches on microwave ...

    • Oxide semiconductors for solar to chemical energy conversion: nanotechnology approach 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Mohd Awang, Idris, Dr.; Zul Azhar, Zahid Jamal, Dato' ,Prof. Dr.; Nafarizal, Nayan, Dr.; Abdul Kadir, Othman, Dr.; Mohd Zainizan, Sahdan, Dr.; Mohamad Pauzi, Zakaria; M, Ionescu; Janusz, Nowotny, Prof. (Institute for Ionics, 2014)
      The present work considers the application of oxide semiconductors in the conversion of solar energy into the chemical energy required for water purification (removal of microbial cells and toxic organic compounds from ...

    • Preparation and characterization of Co-HA powder using modified electroless method 

      Mohd Zaheruddin, Kasmuin; Sri Asliza, Md Amin; Azmi, Rahmat, Prof. Madya Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      C0-HA composite produced by simple electroless deposition method was studied. From the particle size analysis by Malvern particles analyzer its shows that 19% increment in average of the particle size powder increase after ...

    • Response of functionality graded hydroxyapatite/F-75 in saline solution 0.9% NaCl 

      Noorazimah, Mohd Ab Llah; Shamsul Baharin,  Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi (Trans Tech Publications, 2013)
      Functionally graded hydroxyapatite (HAP) /F-75 was fabricated using powder metallurgy technique. Samples fabricated were tested inside 0.9% NaCl to check their bioactivity reaction. After immersed, samples were analyzed ...

    • Sand replacement materials (SRM) in sustainable cement composites; A concise review 

      Madzura, Mohamad; Mazlee, Mohd Noor, Dr.; Shamsul Baharin,  Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)
      This paper presents a short review of research works on the development of sustainable cementitious matrix composites with addition of potential mineral wastes as sand replacement materials. The study emphasizes on the ...

    • Sintering effects on mechanical properties of Co-HA composite prepared by modified electroless deposition. 

      Mohd Zaheruddin, Kasmuin; Sri Asliza, Md Amin; Azmi, Rahmat, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      Co-HA composite produced using electroless deposition without conventional sensitization and activation treatment was studied with varying sintering temperature (1100°C, 1200°C and 1250°C). The particles size, bulk density, ...