Browsing School of Materials Engineering (Articles) by Subject "Nickel"

Now showing items 1-7 of 7

    • Corrosion behavior of Al-Cu-Ni-Y alloys 

      Mohd Nazree, Derman, Dr.; Mohd Jeffry, Radzi; Kumar, R. (Trans Tech Publications, 2013)
      Al based alloy has been widely used in various industries. This research paper aims at the investigation onto the effect of the percentage of Cu and Ni alloying elements in the corrosion behavior of Al-Cu-Ni alloys. The ...

    • Development of dense hydroxyapatite-ni by modified electroless deposition technique. 

      Sri Asliza, Md Amin; Mohd Zaheruddin, Kasmuin; Azmi, Rahmat, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      Ni deposited on HA powder was prepared by electroless plating process without sensitization and activation treatment. The deposited powder obtained was characterized by energy dispersive spectroscopy (EDX) and x-ray ...

    • Effect of alloying elements on carburizing response of sintered iron containing hosphorus 

      Mohammed Misbahul, Amin (Council of Scientific & Industrial ResearchChemistry Section, Z H College of Engineering & Technology, Aligarh Muslim University, 1983)
      A preliminary investigation of carburizing response of sintered compacts of iron containing phosphorus, copper and either nickel or molybdenum has been made. Nickel or molybdenum content was 2 or 4%, copper content was 2or ...

    • Effect of different nickel content on the mechanical properties of hydroxyapatite-ni composites from coated powders 

      Sri Asliza, Md Amin; Mohd Zaheruddin, Kasmuin; Azmi, Rahmat, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      HA-Ni composites were fabricated by uniaxial pressing from coated powders, in which HA particles were successfully coated with nickel precursor by the electroless deposition method. The compacted powders sintered at ...

    • Effect of some sodium salts coatings on the high-temperature oxidation of Nimonic-80A alloy at 1173 K 

      Mohammed Misbahul, Amin (Elsevier Science B.V., 1997)
      The effects of some sodium salts, namely Na2S04, NaCl, NaN03 and Na2C03 coatings, on the high-temperature oxidation behaviour of Nimonic-80A (N-80A) alloy at 1173 K in a slow current of air are presented. The oxidation ...

    • Extraction and separation of Cu(II), Ni(II) and Zn(II) by sol-gel silica immobilized with Cyanex 272 

      Fazlul Bari; Noorzahan, Begum; Kamarudin, Hussin; Samsul Baharin, Jamaludin (Elsevier B.V., 2009-03)
      The extraction and separation of Cu(II), Ni(II) and Zn(II) from aqueous sulfate-acetate solution were carried out using solid phase sol-gel silica containing immobilized Cyanex 272 {bis(2,4,4-trimethylpentyl)phosphinic ...

    • The process of electroplating in presence of Nickel Salts 

      Mohammed Misbahul, Amin; Lep Kuan, Kee; Kamaruzzaman, Yunus (Journal of Ultra Scientist of Physical SciencesFakulti Sains dan Teknologi, Kolej Universiti Sains dan Teknologi Malaysia, 2002)
      Electroplating process has been carried out by utilising the Watt's Bath without brighteners. Plots of weight change of electrodes versus current density shows that weight loss of anodes and weight of deposits on cathodes ...