Browsing School of Materials Engineering (Articles) by Author "Zuraidawani, Che Daud"

Now showing items 1-5 of 5

    • Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Md. Fazlul, Bari, Dr. (Trans Tech Publications, Switzerland, 2011)
      This research was carried out to fabricate and characterize Co-Cr-Mo (F-75) alloy. The samples have been prepared via solid state sintering. The lab work comprises the mixing of F-75 alloy powder with 2 wt. % of binder. ...

    • The corrosion studies of powder metallurgy Co-Cr-Mo (F-75) alloy 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Nazree, Derman, Dr.; Juyana, A Wahab          (AENSI Publisher All rights reserved, 2013-10)
      Co-Cr-Mo (F-75) alloy was investigated for biomedical application due to its mechanical properties and good corrosion resistance. This study has been focusing on the corrosion behavior of PM Co-Cr-Mo alloy. The Co-Cr-Mo ...

    • The effect of electrolyte temperature on formation of porous aluminium oxide films in anodising process 

      Juyana, A Wahab         ; Mohd Nazree, Derman, Dr.; Zuraidawani, Che Daud (AENSI Publisher All rights reserved, 2013-10)
      A porous aluminium oxide film formed on aluminium was prepared in a mixed electrolyte of phosphoric acid and acetic acid solution. The morphology, growth and thickness of the film were investigated. The anodising process ...

    • The effect of sintering on the properties of powder metallurgy (PM) F-75 alloy 

      Zuraidawani, Che Daud; Shamsul Baharin,  Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)
      F-75 (Co-Cr-Mo) alloy are widely used in the production of medical implants because of their excellent strength properties, hardness and also one of the biocompatible materials that very suitable in human body environment. ...

    • Fabrication and characterization of porous F-75 for potential application in tissue engineering 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Tan, Wei Leng; Nur Hidayah, Ahmad Zaidi; Zuraidawani, Che Daud; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2013)
      Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...