Now showing items 1-17 of 17

    • Calcined kaolin geopolymeric powder: Influence of water- to geopolymeric powder ratio 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; cheng, Yong Heah (Trans Tech Publications, 2012-07)
      This paper describes the synthesis of calcined kaolin geopolymeric powder from the alkaline activation of calcined kaolin followed by solidification and pulverizing process. The geopolymeric powder was used by just adding ...
    • Correlating composition design and properties of calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Heah, Cheng Yong (American Scientific Publishers, 2013-12)
      This paper discussed the relation between composition design and properties of calcined kaolin geopolymeric powder. Geopolymeric powder was produced by applying the geopolymerization process. The solids-to-liquid ratios ...
    • Effect of alkali concentration on mechanical properties of kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Liew, Yun Ming (Procema SA, 2012)
      Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...
    • The effect of different sizes "Batu Reput" (Dolomite) as a filler in SMR L and ENR-50 

      J. N., M. Ridhwan; Nik Noriman, Zulkepli, Dr.; Mohd Arif Anuar, Mohd Salleh; Sam, Sung Ting, Dr.; Luqman, Musa, Dr.; Nik Zakaria, Nik Yahya (Trans Tech Publications, 2013)
      The effects of different sizes of "Batu Reput" (Dolomite) filler which are smaller size (<63μm) and bigger size (75-150μm) on tensile and morphological properties of "Batu Reput" (Dolomite) filled SMR L and epoxidized ...
    • The flexural and impact properties of kenaf-polypropylene composites filled with montmorillonite filler 

      Tay, Guan Seng, Dr.; Azniwati, A. A.; Azizah, A. B.; Rozman, Hj. Din, Prof.; Luqman, Musa, Dr. (Taylor and Francis Group, LLC., 2012-01)
      Kenaf- Polypropylene composites filled with montmorillonite (MMT) filler were produced. The incorporation of MMT had improved the flexural and impact properties. Addition of compatibilizer, had improved the flexural and ...
    • General properties of kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (American Scientific Publishers, 2013-01)
      This paper reported the properties of kaolin geopolymers in term of the bulk density, compressive strength, qualitative observation and SEM analysis of the kaolin geopolymers. Kaolin geopolymers were synthesized through ...
    • Influence of oxide molar ratios on kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (American Scientific Publishers, 2013-12)
      Oxide molar ratios are the main key parameter determining the performance of a kaolin geopolymers. The kaolin composition and various mixture proportions will lead to different oxide molar ratios in geopolymer system. In ...
    • Influence of solidification process on calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Trans Tech Publications, 2012-02)
      This paper aims at investigating the influence of solidification condition on the processing of calcined kaolin geopolymeric powder. This is a new process developed using the geopolymerization process. Geopolymer slurry ...
    • Investigating the possibility of utilization of kaolin and the potential of metakaolin to produce green cement for construction purposes-A review 

      Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Liew, Y. M.; Mohd Mustafa Al Bakri, Abdullah; Luqman, Musa, Dr.; Khairul Nizar, I.; Heah, Cheng Yong (INSInet Publication, 2011-09)
      Geopolymers are inorganic alkali aluminosilicate gels, formed from reaction of mineral clays or aluminosilicate-bearing industrial wastes, and treated with alkali silicate solution at 40-80°C. Geopolymers have been studied ...
    • Kaolin-based geopolymers with various NaOH concentrations 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (Springer Verlag, 2013-03)
      Kaolin geopolymers were produced by the alkali-activation of kaolin with an activator solution (a mixture of NaOH and sodium silicate solutions). The NaOH solution was prepared at a concentration of 6-14 mol/L and was mixed ...
    • Kenaf bast-unsaturated polyester composite: The effect of different alkaline treatment condition on tensile properties 

      Rozyanty, Abdul Rahman; Luqman, Musa, Dr.; Nur Firdaus, M. Y. (Trans Tech Publications, 2014)
      The biocomposites were prepared by using kenaf bast fiber mat as reinforcing materials at different percentage. The kenaf bast fiber was treated with alkaline at different sodium hydroxide (NaOH) percentage. Composites ...
    • Optimization of solids-to-liquid and alkali activator ratios of calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Elsevier Ltd, 2012-12)
      This paper investigates the effect of S/L and alkali activator ratios on the synthesis of geopolymeric powder. Geopolymeric powder was synthesized by applying geopolymerization process. By adopting the concept of "just ...
    • Potential application of kaolin without calcine as greener concrete: A review 

      Cheng, Yong Heah; Hazlinda, Kamarudin; Mohd Mustafa Al-Bakri, Abdullah; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr; Liew, Y. M. (INSInet Publications, 2011-07)
      Kaolin is a white raw material that has an essential constituent which makes it ideal for industrial applications such as green concrete. Based on a historical review, it appears that green polymeric composites created by ...
    • Processing and characterization of calcined kaolin cement powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Elsevier Ltd, 2012-05)
      Abstract This paper aimed at investigating the possibility of calcined kaolin to produce cement powder that could be an alternative to Portland cement by applying geopolymerization process. Cement paste was firstly made ...
    • Properties of metakaolin geopolymeric binder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Heah, Cheng Yong (American Scientific Publishers, 2013-01)
      This paper investigates the physical and mechanical properties as well as the morphology study of the MK geopolymeric binder. Mixture of waterglass liquid and NaOH solution were used as the activator solution for the ...
    • Recycled high density polyethylene / natural rubber / chicken feather fibers (RHDPE/NR/CFF) composites: The effects of fiber loading and benzyl urea on tensile 

      Yazid, M.I.M.; Supri, Abdul Ghani, Prof. Madya Dr.; Firuz, Zainuddin, Dr.; Luqman, Musa, Dr. (Trans Tech Publications Inc., 2013-09)
      The effects of benzyl urea into RHDPE/NR/CFF composites with different fibers loading were studied. The composites were prepared using BrabenderPlasticorder at 160 °C with rotor speed of 50rpm. The composites were characterized ...
    • Tensile properties of kenaf/unsaturated polyester composites filled with a montmorillonite filler 

      Rozman, Haji Din, Prof.; Luqman, Musa, Dr.; Azniwati, A. A.; Rozyanty, Abdul Rahman (Wiley Periodicals, Inc., 2011-03-05)
      Kenaf/unsaturated polyester composites filled with montmorillonite (MMT) filler were produced. Overall, the study showed that, for samples with kenaf filler only, the strength properties decreased as the kenaf filler loading ...